Konrad,

That's incorrect. We do not use the authentication string any more as many
of the BMC products have bugs in them which prevent SSO being implemented
correctly and safely. I can provide an official list of SW numbers if you
wish, where the authentication string is not passed correctly. To name a
few, Crystal Reports integration and Flashboards within the Windows User
Tool. So good luck when you find your first customer who wants to use
reports on the web or flashboards in the WUT.

Sean, et al,

Java System Solutions has been working with BMC as an SSO solution provider
for four years now. We have partners that support and sell our product such
as BMC themselves, Materna in Germany and Denmark, at which this month they
have published an article about our solution in their magazine (including an
embarrassing picture of John Baker and myself, I'm only 34 years old
honest!), Comfort in Poland from which Konrad used to work for, SoftwareOne
and Zones. So we have customers which are Banks where security has become an
priority and we were happy to modify our product as required, in partnership
with these customers.

So I can confidently let you know, and provide references, from customers
and partners who can verify our security.

In version 2.1, for the WUT SSO, we did store a password in the registry
encrypted by AES http://en.wikipedia.org/wiki/Advanced_Encryption_Standard
This was seen as secure enough for two large American banks and one Polish
Bank.
In version 3.0, due for release in April, we have added another layer of
encryption for the WUT where the password uses rotating keys very similar to
http://www.freshpatents.com/Rotation-of-keys-during-encryption-decryption-dt
20061214ptan20060280298.php
Again, all this is passed in the password field instead of the
authentication field, and thus is again encrypted by BMCs own DES encryption
over the wire.

I believe with all that above, we are confidently happy with our product and
so could many BMC representatives and partners alike.

Elry,

This is turning into a bit of an advert, and for that I apologise Dan/List,
but you can find out more information from www.javasystemsolutions.com or
send me an email off the list [email protected]

Kind regards
Danny 

-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Konrad Banasiak
Sent: 30 March 2010 16:17
To: [email protected]
Subject: Re: Top Positions SSO Solution

Sean,

Java System's plugin use authentication password saved in the windows
register on all workstations to authenticate users through the RUT.
All users have the same password. In my opinion it is not very save method.

Mid-tier use the ARSAPI to communicate with ARS so communication between mt
and ars is crypted.
Of course we must believe that crypted method between ars an mt used by BMC
is save.

In this document you can read about ars security.
http://documents.bmc.com/supportu/documents/22/39/92239/92239.pdf



Cheers
 
Konrad

TopPositions
Really only one secure Plugin SSO for BM Remedy AR System.
Http://www.remedy-sso.com

-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Elry
Sent: Tuesday, March 30, 2010 4:54 PM
To: [email protected]
Subject: Re: Top Positions SSO Solution

Thanks for all the responses...

Konrad - quick question:  Seems like you are saying that by signing on
through the WUT - there is a secure protocol that is followed when
using java system's  plugin.

Are there any issues when trying to do SSO through the Mid-Tier?

Not that I perceive this as an issue for us, since we are primarily
focused on the WUT.



On Mar 30, 10:35 am, Konrad Banasiak <[email protected]> wrote:
> Sean,
>
> You have right. I agree with you.
> I will try to explain you how Plugin SSO works from TopPositions.
>
> If you connect to ARS through the Mid-Tier. Md-Tier is authenticating in
the ARS through the special password.
> Of course the mid-tier-ip is on the whitelist (see the Installation guide
page 15, MidTier-IP parameter).
>
> But if client connect to ARS through the Windows client you have the
followed process:
> 1. Remedy User authenticate user in the special Authentication Service
through the NTLM negotiation(NTLMv2) in the Domain Controler.
> 2. If user is confirmed the Service return generated token to the Remedy
User. (Token is unique for every User)
> 3. Remedy User passed into the "Authentication" field in area this token
to ARESSO.
> 4. AREA SSO confirm in the Authentication Service this token, If token is
correct user is authenticate, if no user is no authenticate. Of course the
Authentication Service confirm client IP address. And the token expired if
is not use to long time.
>
> Cheers
>
> Konrad
>
> TopPositions
> Really only one secure Plugin SSO for BM Remedy AR System.
> Http://www.remedy-sso.com
>
> -----Original Message-----
> From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Garrison, Sean (Norcross)
> Sent: Tuesday, March 30, 2010 4:01 PM
> To: [email protected]
> Subject: Re: Top Positions SSO Solution
>
> Without being too technical I don't really trust an ARS SSO integration
that much.  In order to build an sso you have to follow a process:
>
> 1.  Modify the authentication to the mid-tier to check the users
credentials.
> 2.  If the user is valid allow them to log into remedy
> 3.  If the user is from mid-tier and they have valid credentials bypass
the AREA authentication and let them in.
>
> It is at step 3 where I believe the security hole lies in an SSO
implementation.  Granted there is some security but it is relatively weak.
 Typically they ask you to enter in a list of ip addresses and a password of
some type.  This password is usually passed into the "Authentication" field
in area.  The IP address is a "whitelist" to tell area whether or not this
is a mid-tier ip.  So let's say you added your ip address to the whitelist
that you configure for the sso implementation.  Using the User tool you
enter in the mid-tier password into the authentication field and put in your
username leaving the password field blank.  My guess is that you would log
right into ars with no problems.  Go further and you could probably spoof
one of the mid-tier ip addresses so that ars thinks your ip address is one
of the mid-tiers you could do the same thing with entering in no password
just the mid-tier password.  I don't know what java system solutions does
for this issue nor what the remedy-sso does.  But in both flowcharts you see
a little arrow going from mid-tier to ARS.  Before implementing either SSO I
would recommend validating with the vendor how secure that data is that is
passed between mid-tier and ars and your comfort level with this type of
security.  The only reason I know this is because I have tried to build an
SSO solution before.
>
> Thanks,
>
> Sean
>
> -----Original Message-----
> From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Shellman, David
> Sent: Tuesday, March 30, 2010 8:25 AM
> To: [email protected]
> Subject: Re: Top Positions SSO Solution
>
> Top Positions is spamming every email address that they can associate with
an Remedy Admin.  They hit a new email address of mine that was added to
thewww.wwrug.comwebsite a couple of weeks ago.
> Dave
> -------------------------
> [email protected]
> (Wireless)
>
> ----- Original Message -----
> From: Action Request System discussion list(ARSList)
>
____________________________________________________________________________
___
> UNSUBSCRIBE or access ARSlist Archives atwww.arslist.org
> attend wwrug10www.wwrug.comARSlist: "Where the Answers Are"

____________________________________________________________________________
___
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
attend wwrug10 www.wwrug.com ARSlist: "Where the Answers Are"

____________________________________________________________________________
___
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
attend wwrug10 www.wwrug.com ARSlist: "Where the Answers Are"

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
attend wwrug10 www.wwrug.com ARSlist: "Where the Answers Are"

Reply via email to