Thanks guys for all the help. I am still trying to figure it out. One more question. When servers are geographically dispersed, how does this work? Typically only mid tier port would be exposed for outside, if at all. If servers are behind firewalls, do we have to go with Placeholder Server which has a public IP?
~ Nathan On Tue, Apr 9, 2013 at 6:32 PM, Chad M Whilding <cwhild...@csc.com> wrote: > ** Nathan, > > If there is no conflict between your /etc/hosts and DNS, then double check > the ar.cfg. > > There is also an IP-Name parameter that can be used for a server with > multiple names. There are also some DSO specific name parameters. > > Double check that none of these are conflicting. > > Regards, > Chad Whilding > Senior Developer > CSC > > 3560 Pentagon Blvd., Beavercreek, OH 45431-1706 > North American Public Sector | p: +1-937.320-7827 | f: | cwhild...@csc.com| > www.csc.com > > > This is a PRIVATE message. If you are not the intended recipient, please > delete without copying and kindly advise us by e-mail of the mistake in > delivery. > NOTE: Regardless of content, this e-mail shall not operate to bind CSC to > any order or other contract unless pursuant to explicit written agreement > or government initiative expressly permitting the use of e-mail for such > purpose. > > > > > From: Nathan Brandt <nathanrbra...@gmail.com> > To: arslist@ARSLIST.ORG > Date: 04/09/2013 01:13 AM > Subject: Issues in DSO 7.6.04 SP2 Linux->Windows > Sent by: "Action Request System discussion list(ARSList)" < > arslist@ARSLIST.ORG> > ------------------------------ > > > > ** > We are trying to setup DSO between 2 AR servers. > One is on RHEL 5.3, 7.6.04 SP2 and other is on Win 2k 8, 7.6.04 SP2 > > We enabled DSO on both the servers. Machines are in same network and > accessible from one another using machine name (same as AR Server name). > > After making all configuration changes, we observe following > > 1. From Developer Studio, if we connect to Windows ARS, we are able to > connect to > Linux Server in one of the distributed mappings. Even here, there is > small glitch, we need to specify IP address of Linux machine. It doesn't > work with AR Server Name of Linux machine. > > 2. But from Developer Studio, if we connect to Linux ARS, no matter what > we put we are not able to establish connection to Windows ARS server. > > When configuring DSO on both, we have used machine names (same as AR > Server Alias Name) (and not FQDN) of the remote AR Server. > > Any clues what might be going wrong? > > ~ Nathan > > _ARSlist: "Where the Answers Are" and have been for 20 years_ > _ARSlist: "Where the Answers Are" and have been for 20 years_ > _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"
