Thanks Michael That makes sense, but I've checked the DoTLS field and it's set to 'Do TLS'.
I have nothing set in the ProxyConf field - should I have a value in here? Are there any other settings that might be causing this proxy-ing? Nick -----Original Message----- From: Michael Thomas [mailto:[email protected]] Sent: 23 May 2013 04:49 To: For Users of ASSP Subject: Re: [Assp-user] Missing 'Received' headers in ASSP v2 Nick, >>> message proxied without processing Okay, we are back to the fact that you are using STARTTLS, which I ask about testing without STARTTLS a few of emails ago. In "SSL Proxy and TLS support" section, in the field, "How to Handle STARTTLS Requests (DoTLS)" do you have "TLS to Proxy" selected? In "Transparent TCP Proxy Table* (ProxyConf)" is your hmailserver iP:port set up? If you have TLS set up to proxy to your server, then ASSP CANNOT write the header. ASSP is just passing encrypted packets from your PC to your server. Michael Thomas On 5/22/2013 5:32 PM, Nick Marshall wrote: > The two lines that represent the email passing through ASSP are extracted at the top of my last email. I just included the rest of the log showing the start up in case it revealed anything. > > The mail is definitely passing through ASSP. The extract from the maillog is here again.... > >>> -------------------------------------------------------------------- >>> -------- >>> ------- >>> >>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [NoProcessing] >>> 77.36.34.43 <[email protected]> to: [email protected] message >>> proxied without processing >>> - (attachments unchecked) - (noProcessing) - [] >>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [MessageOK] 77.36.34.43 >>> <[email protected]> to: [email protected] message ok - >>> (noProcessing) - [] >>> >>> -------------------------------------------------------------------- >>> -------- > > Thanks > Nick > > > On 22 May 2013, at 21:10, Michael Thomas <[email protected]> wrote: > >> Nick, >> >> That log is a standard start up. There was no message processing in >> the log. So, if that log file covered a time span in which you >> delivered a message, it did not go through ASSP. I did not see a connection logged. >> >> Side issue. Check your log for errors. Just glancing through, I noted >> ClamAV is not available and your Regex Optimizer is too old. >> >> Michael Thomas >> >> On 5/22/2013 3:55 PM, Nick Marshall wrote: >>> Below is the content of the maillog representing this message >>> passing through ASSP v2 at the time of the headers: >>> >>> -------------------------------------------------------------------- >>> -------- >>> ------- >>> >>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [NoProcessing] >>> 77.36.34.43 <[email protected]> to: [email protected] message >>> proxied without processing >>> - (attachments unchecked) - (noProcessing) - [] >>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [MessageOK] 77.36.34.43 >>> <[email protected]> to: [email protected] message ok - >>> (noProcessing) - [] >>> >>> -------------------------------------------------------------------- >>> -------- >>> ------- >>> >>> These are the only two lines in the log representing this message. >>> >>> This corresponds to the headers below: >>> >>> -------------------------------------------------------------------- >>> -------- >>> ------- >>> >>> Return-Path: <[email protected]> >>> Received: from inbound104.mstream.com ([77.36.34.151]) >>> by inbound102.mstream.com >>> with hMailServer ; Wed, 22 May 2013 10:15:12 +0100 >>> From: "test" <[email protected]> >>> To: <[email protected]> >>> Subject: test >>> Date: Wed, 22 May 2013 10:15:14 +0100 >>> Message-ID: <[email protected]> >>> >>> -------------------------------------------------------------------- >>> -------- >>> ------- >>> >>> Below is additional information from the maillog on starting the service: >>> >>> May-22-13 10:13:47 [startup] Starting as a service >>> May-22-13 10:13:50 [startup] ASSP-professional version 2.3.3(13137) >>> (Perl >>> 5.016002) (on MSWin32) initializing >>> May-22-13 10:13:50 [startup] Info: registered encrypted >>> POP3ConfigFile file c:/assp/files/pop3cfg.txt >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/MaxRealSize.txt' (MaxRealSizeAdr): >>> No such file or directory >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/MaxRealSizeExt.txt' >>> (MaxRealSizeExternalAdr): No such file or directory >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/MaxSize.txt' (MaxSizeAdr): No such >>> file or directory >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/MaxSizeExt.txt' >>> (MaxSizeExternalAdr): No such file or directory >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/noprocessingfrom.txt' >>> (noProcessingFrom): No such file or directory >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/noprocessingdomains.txt' >>> (noProcessingDomains): No such file or directory >>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/localdomains.txt' (localDomains): No >>> such file or directory >>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/nopbwhite.txt' (noPBwhite): No such >>> file or directory >>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/uriblwhite.txt' (URIBLwhitelist): No >>> such file or directory >>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/bombsenderre.txt' (bombSenderRe): No >>> such file or directory >>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/charsets.txt' (bombCharSets): No >>> such file or directory >>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/bombdatare.txt' (bombDataRe): No >>> such file or directory >>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/suspiciousre.txt' >>> (bombSuspiciousRe): No such file or directory >>> May-22-13 10:13:52 [startup] Info: switched (DNS) nameserver order >>> from to >>> 45.125.48.31 , 45.125.48.32 , 77.36.34.33 >>> May-22-13 10:13:52 [startup] Info: removed 0 config change schedules >>> May-22-13 10:13:52 [startup] AdminInfo: failed to open option list >>> file for reading 'c:/assp/files/notls.txt' (noTLSIP): No such file >>> or directory >>> May-22-13 10:13:52 [startup] Info: an ASSP restart will be done with: >>> cmd.exe /C start "ASSPSMTP restarted" "C:\Perl64\bin\perl.exe" >>> "c:\assp\c:\assp\assp.pl" "c:/assp" >>> May-22-13 10:13:52 [startup] ASSP version 2.3.3(13137) (Perl >>> 5.016002) (on MSWin32)running on server: inbound104 (77.36.34.151) >>> May-22-13 10:13:52 [startup] Info: unicode support is available on >>> that system >>> May-22-13 10:13:52 [init] Info: analysing windows system environment >>> May-22-13 10:13:52 [init] Info: windows system environment looks OK >>> May-22-13 10:13:52 [init] Threads module 1.86 installed >>> May-22-13 10:13:52 [init] Threads::shared module 1.42 installed >>> May-22-13 10:13:52 [init] Thread::Queue module 2.12 installed >>> May-22-13 10:13:52 [init] IO::Poll module 0.09 installed >>> May-22-13 10:13:52 [init] IO::Select module 1.21 installed >>> May-22-13 10:13:52 [init] ASSP is using IOEngine - Poll >>> May-22-13 10:13:52 [init] Thread::State module version 0.09 >>> installed and available >>> May-22-13 10:13:52 [init] IO::Socket::INET6 module is not detected >>> (enableIPv6 is not set). >>> May-22-13 10:13:53 [init] File::Scan::ClamAV module version 1.8 >>> installed but not available, error: Cannot connect to 'localhost:3310': >>> IO::Socket::INET: connect: 10061 >>> May-22-13 10:13:53 [init] Net::LDAP module version 0.53 installed >>> and available >>> May-22-13 10:13:53 [init] Net::DNS module version 0.72 installed and >>> available >>> May-22-13 10:13:53 [init] Email::Valid module version 0.190 >>> installed and available >>> May-22-13 10:13:53 [init] Net::SMTP module version 2.31 installed >>> and available >>> May-22-13 10:13:53 [init] Net::SMTP::TLS module version 0.12 >>> installed and available >>> May-22-13 10:13:53 [init] NetSNMP::agent module is not installed. >>> May-22-13 10:13:53 [init] Mail::SPF::Query module version 1.999001 >>> installed and available >>> May-22-13 10:13:53 [init] Mail::SPF module version 2.008 installed >>> and available >>> May-22-13 10:13:53 [init] Mail::SRS module version 0.31 installed - >>> Sender Rewriting Scheme available >>> May-22-13 10:13:53 [init] Compress::Zlib module version 2.055 >>> installed - HTTP compression available >>> May-22-13 10:13:53 [init] Digest::MD5 module version 2.52 installed >>> - delaying can use MD5 keys for hashes >>> May-22-13 10:13:53 [init] Digest::SHA1 module version 2.13 installed >>> - BATV and FBMTV check available >>> May-22-13 10:13:53 [init] File::ReadBackwards module version 1.05 >>> installed >>> - searching of log files enabled >>> May-22-13 10:13:53 [init] Time::HiRes module version 1.9725 >>> installed - CPU usage statistics available >>> May-22-13 10:13:53 [init] Sys::Syslog module version 0.32 installed >>> - Unix centralized logging enabled >>> May-22-13 10:13:53 [init] Net::Syslog module version 0.04 installed >>> - network Syslog logging enabled >>> May-22-13 10:13:53 [init] Win32::Daemon module version 20110117 >>> installed - can run as Win32 service >>> May-22-13 10:13:53 [init] Win32::API::OutputDebugString module is >>> not installed - unable to debug to Win32 API >>> May-22-13 10:13:53 [init] Unicode::GCString module version 2012.10 >>> installed >>> - can detect east asian language strings as sequence of UAX #29 >>> Grapheme Clusters to analyze Bayes and HMM >>> May-22-13 10:13:53 [init] Win32::Unicode module version 0.38 >>> installed - can write unicode filenames to OS >>> May-22-13 10:13:53 [init] Convert::Scalar module version 1.1 >>> installed - can use optimized memory handling >>> May-22-13 10:13:53 [init] Tie::RDBM module version 0.73 installed - >>> database usage available >>> May-22-13 10:13:53 [init] DB_File module is not installed - DB_File >>> (Berkeley V1) database usage not available >>> May-22-13 10:13:53 [init] BerkeleyDB module is not installed - >>> Berkeley database usage not available >>> May-22-13 10:13:53 [init] Info: griplist is using basic 'orderedtie' >>> in file c:/assp/griplist >>> May-22-13 10:13:53 [init] Net::CIDR::Lite module version 0.21 >>> installed - hyphenated IP address range available >>> May-22-13 10:13:53 [init] NetAddr::IP::Lite module version 1.05 >>> installed - hyphenated IP and CIDR address range calculation >>> available >>> May-22-13 10:13:53 [init] Net::IP module version 1.26 installed - >>> hyphenated IP and CIDR address range calculation available >>> May-22-13 10:13:53 [init] Net::SenderBase module version 1.01 >>> installed - Query the senderbase service available >>> May-22-13 10:13:53 [init] LWP::Simple module version 6.00 installed >>> - procedural LWP interface available >>> May-22-13 10:13:53 [init] Email::MIME::Modifier module version 1.911 >>> installed - MIME charset decoding and conversion interface and >>> attachment detection available >>> May-22-13 10:13:53 [init] MIME::Types module version 1.38 installed >>> - TNEF conversion may possible >>> May-22-13 10:13:53 [init] Email::Send module version 2.198 installed >>> - sending .eml files available >>> May-22-13 10:13:53 [init] Convert::TNEF module version 0.18 >>> installed - TNEF conversion is available >>> May-22-13 10:13:53 [init] Mail::DKIM::Verifier module is not >>> installed - DKIM verification not available >>> May-22-13 10:13:53 [init] Schedule::Cron module version 0.97 >>> installed - RebuildSpamdb Scheduler is available >>> May-22-13 10:13:53 [init] Sys::MemInfo module version 0.91 installed >>> - memory calculation is available >>> May-22-13 10:13:53 [init] Sys::CpuAffinity module version 1.06 >>> installed - setting CPU Affinty is available - this system has 4 >>> CPU's >>> May-22-13 10:13:53 [init] The Cpu Affinity of assp is currently '0 1 2 3' >>> May-22-13 10:13:53 [init] Authen::SASL module version 2.16 installed >>> - SMTP AUTH is available >>> May-22-13 10:13:53 [init] Regexp::Optimizer module is not installed >>> - default Regular Expression Optimization is not available - regex >>> processing will take approximately 3 times longer >>> May-22-13 10:13:53 [init] Regex::Optimizer module with wrong version >>> (1.11) installed (requires 1.12) - enhanced Regular Expression >>> Optimization is not available - regex processing will take >>> approximately 6 times longer >>> May-22-13 10:13:53 [init] AsspSelfLoader module version 2.03 >>> installed - ASSP Code Load Optimization is available >>> May-22-13 10:13:53 [init] ASSP_WordStem module is not installed - >>> ASSP multi lingual word stemming engine for Bayesian and HMM checks >>> is not available >>> May-22-13 10:13:53 [init] IO::Socket::SSL module version 1.77 >>> installed - https and TLS/SSL is possible >>> May-22-13 10:13:53 [init] Found valid certificate and private key >>> file - https and TLS/SSL is available >>> May-22-13 10:13:53 [init] Warning: There were module load errors >>> detected - look in to file c:/assp/moduleLoadErrors.txt for more >>> details. To solve this issue install the failed modules or disable them in the 'Module Setup' >>> section in the GUI. >>> May-22-13 10:13:53 [init] Error: unclean shutdown of ASSP detected >>> May-22-13 10:13:53 [init] Saving config >>> May-22-13 10:13:53 [init] Info: saved config to c:/assp/assp.cfg.tmp >>> - which is now renamed to c:/assp/assp.cfg >>> May-22-13 10:13:53 [init] Finished saving config >>> May-22-13 10:13:53 [init] Info: Whitelist loaded from >>> c:/assp/whitelist with >>> 0 records >>> May-22-13 10:13:53 [init] Info: PersBlack loaded from >>> c:/assp/persblack with >>> 0 records >>> May-22-13 10:13:53 [init] Info: Redlist loaded from c:/assp/redlist >>> with 0 records >>> May-22-13 10:13:53 [init] Info: Delay loaded from c:/assp/delaydb >>> with 0 records >>> May-22-13 10:13:53 [init] Info: DelayWhite loaded from >>> c:/assp/delaydb.white with 0 records >>> May-22-13 10:13:54 [init] Info: PBWhite loaded from >>> c:/assp/pb/pbdb.white.db with 134528 records >>> May-22-13 10:13:54 [init] Warning: PBWhite contains 134528 records >>> (allocating at least 77.3MB) - it is highly recommended to use a >>> database for 'pbdb' >>> May-22-13 10:13:54 [init] Info: PBBlack loaded from >>> c:/assp/pb/pbdb.black.db with 0 records >>> May-22-13 10:13:54 [init] Info: RBLCache loaded from >>> c:/assp/pb/pbdb.rbl.db with 0 records >>> May-22-13 10:13:54 [init] Info: URIBLCache loaded from >>> c:/assp/pb/pbdb.uribl.db with 0 records >>> May-22-13 10:13:54 [init] Info: PTRCache loaded from >>> c:/assp/pb/pbdb.ptr.db with 0 records >>> May-22-13 10:13:54 [init] Info: MXACache loaded from >>> c:/assp/pb/pbdb.mxa.db with 0 records >>> May-22-13 10:13:54 [init] Info: RWLCache loaded from >>> c:/assp/pb/pbdb.rwl.db with 0 records >>> May-22-13 10:13:54 [init] Info: SPFCache loaded from >>> c:/assp/pb/pbdb.spf.db with 0 records >>> May-22-13 10:13:54 [init] Info: SBCache loaded from >>> c:/assp/pb/pbdb.sb.db with 0 records >>> May-22-13 10:13:54 [init] Info: PBTrap loaded from >>> c:/assp/pb/pbdb.trap.db with 0 records >>> May-22-13 10:13:54 [init] Info: DKIMCache loaded from >>> c:/assp/pb/pbdb.dkim.db with 0 records >>> May-22-13 10:13:54 [init] Info: BATVTag loaded from >>> c:/assp/pb/pbdb.batv.db with 0 records >>> May-22-13 10:13:54 [init] Info: BackDNS loaded from >>> c:/assp/pb/pbdb.back.db with 0 records >>> May-22-13 10:13:54 [init] Warning: unable to open c:/assp/spamdb to >>> load Spamdb >>> May-22-13 10:13:54 [init] Warning: unable to open >>> c:/assp/spamdb.helo to load HeloBlack >>> May-22-13 10:13:54 [init] Warning: unable to open c:/assp/HMMdb to >>> load HMMdb >>> May-22-13 10:13:54 [init] Info: LDAPlist loaded from >>> c:/assp/ldaplist with 0 records >>> May-22-13 10:13:54 [init] Starting maintenance worker thread [10000] >>> - ThreadCycleTime is set to 3000 microseconds >>> May-22-13 10:13:54 [Worker_10000] Info: switched (DNS) nameserver >>> order from >>> 46.175.48.31 , 46.175.48.32 , 77.36.34.33 to 77.36.34.33 , >>> 46.175.48.31 , >>> 46.175.48.32 >>> May-22-13 10:13:54 [Worker_10000] Worker_10000 started >>> May-22-13 10:13:54 [Worker_10000] Info: 0 records of PersBlack saved >>> May-22-13 10:13:54 [init] Starting rebuild SpamDB worker thread >>> [10001] - ThreadCycleTime is set to 30 microseconds >>> May-22-13 10:13:54 [Worker_10001] Worker_10001 started >>> May-22-13 10:13:54 [Worker_10001] Info: found module >>> c:/assp/lib/rebuildspamdb.pm version 6.25 >>> May-22-13 10:13:54 [init] Starting SMTP-worker-threads with >>> ThreadCycleTime set to 3000 microseconds >>> May-22-13 10:13:54 [init] Starting communication worker threads [1 >>> to 15] >>> May-22-13 10:13:55 [Worker_1] Worker_1 started >>> May-22-13 10:13:55 [Worker_2] Worker_2 started >>> May-22-13 10:13:55 [Worker_3] Worker_3 started >>> May-22-13 10:13:56 [Worker_4] Worker_4 started >>> May-22-13 10:13:56 [Worker_5] Worker_5 started >>> May-22-13 10:13:56 [Worker_6] Worker_6 started >>> May-22-13 10:13:56 [Worker_7] Worker_7 started >>> May-22-13 10:13:57 [Worker_8] Worker_8 started >>> May-22-13 10:13:57 [Worker_9] Worker_9 started >>> May-22-13 10:13:57 [Worker_10] Worker_10 started >>> May-22-13 10:13:57 [Worker_11] Worker_11 started >>> May-22-13 10:13:58 [Worker_12] Worker_12 started >>> May-22-13 10:13:58 [Worker_13] Worker_13 started >>> May-22-13 10:13:58 [Worker_14] Worker_14 started >>> May-22-13 10:13:58 [Worker_15] Worker_15 started >>> May-22-13 10:13:59 [init] All Threads are started >>> May-22-13 10:13:59 [init] Info: CPU priority changed for >>> Worker_10000 from 0 to 2 >>> May-22-13 10:13:59 [init] Info: CPU priority changed for >>> Worker_10001 from 0 to 2 >>> May-22-13 10:13:59 [init] Warning: Bayesian spam database has only 0 >>> records >>> May-22-13 10:13:59 [init] Warning: whitelist has only 0 records: >>> (ignore if this is a new install) >>> May-22-13 10:13:59 [init] Info: saving Stats in file asspstats.sav >>> May-22-13 10:14:00 [init] Listening for SMTP connections on >>> 0.0.0.0:25 >>> May-22-13 10:14:01 [init] Listening for SMTPS (SSL) connections on >>> 0.0.0.0:465 >>> May-22-13 10:14:01 [init] Listening for admin HTTP connections on >>> 0.0.0.0:55555 0.0.0.0:22222 >>> May-22-13 10:14:01 [init] Listening for stat HTTP connections on >>> 0.0.0.0:55553 >>> May-22-13 10:14:01 [init] Listening for additional SMTP connections >>> on >>> 0.0.0.0:587 >>> May-22-13 10:14:01 [init] Current PID: 3356 >>> May-22-13 10:14:01 [init] Info: command queue released >>> May-22-13 10:14:01 [init] Info: central signalhandler - ABRT(22) - >>> BREAK(21) >>> - NUM19(19) - FPE(8) - NUM12(12) - NUM16(16) - NUM18(18) - NUM17(17) >>> - >>> STOP(23) - NUM24(24) - NUM10(10) - SEGV(11) - QUIT(3) - KILL(9) - >>> PIPE(13) - >>> NUM05(5) - CONT(25) - NUM06(6) - NUM07(7) - ILL(4) - INT(2) - HUP(1) >>> - >>> TERM(15) - CHLD(20) - CLD(26) - ALRM(14) - installed >>> >>> >>> Nick >>> >>> >>> -----Original Message----- >>> From: Fritz Borgstedt [mailto:[email protected]] >>> Sent: 22 May 2013 18:14 >>> To: For Users of ASSP >>> Subject: Re: [Assp-user] Missing 'Received' headers in ASSP v2 >>> >>> For Users of ASSP <[email protected]> schreibt: >>>> It certainly looks as if the message is not passing through v2, but >>>> it is. >>> >>> >>> You should find the mail in Maillog then. >>> >>> -------------------------------------------------------------------- >>> -------- >>> -- >>> Try New Relic Now & We'll Send You this Cool Shirt New Relic is the >>> only SaaS-based application performance monitoring service that >>> delivers powerful full stack analytics. Optimize and monitor your >>> browser, app, & servers with just a few lines of code. Try New Relic >>> and get this awesome Nerd Life shirt! >>> http://p.sf.net/sfu/newrelic_d2d_may >>> _______________________________________________ >>> Assp-user mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/assp-user >>> >>> >>> >>> >>> ______________________________________________ >>> Giacom email security by www.messagestream.com >>> >>> >>> >>> >>> >>> -------------------------------------------------------------------- >>> ---------- Try New Relic Now & We'll Send You this Cool Shirt New >>> Relic is the only SaaS-based application performance monitoring >>> service that delivers powerful full stack analytics. Optimize and >>> monitor your browser, app, & servers with just a few lines of code. >>> Try New Relic and get this awesome Nerd Life shirt! >>> http://p.sf.net/sfu/newrelic_d2d_may >>> _______________________________________________ >>> Assp-user mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/assp-user >> >> --------------------------------------------------------------------- >> --------- Try New Relic Now & We'll Send You this Cool Shirt New >> Relic is the only SaaS-based application performance monitoring >> service that delivers powerful full stack analytics. Optimize and >> monitor your browser, app, & servers with just a few lines of code. >> Try New Relic and get this awesome Nerd Life shirt! >> http://p.sf.net/sfu/newrelic_d2d_may >> _______________________________________________ >> Assp-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/assp-user >> >> >> > > > ---------------------------------------------------------------------- > -------- Try New Relic Now & We'll Send You this Cool Shirt New Relic > is the only SaaS-based application performance monitoring service that > delivers powerful full stack analytics. Optimize and monitor your > browser, app, & servers with just a few lines of code. Try New Relic > and get this awesome Nerd Life shirt! > http://p.sf.net/sfu/newrelic_d2d_may > _______________________________________________ > Assp-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-user > ---------------------------------------------------------------------------- -- Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_may _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user ------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_may _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user
