Nick, Like I said, test it without STARTTLS. Isolate the issue.
Michael Thomas On 5/23/2013 5:56 AM, Nick Marshall wrote: > Thanks Michael > > That makes sense, but I've checked the DoTLS field and it's set to 'Do TLS'. > > I have nothing set in the ProxyConf field - should I have a value in here? > > Are there any other settings that might be causing this proxy-ing? > > Nick > > > -----Original Message----- > From: Michael Thomas [mailto:[email protected]] > Sent: 23 May 2013 04:49 > To: For Users of ASSP > Subject: Re: [Assp-user] Missing 'Received' headers in ASSP v2 > > Nick, > > >>> message proxied without processing > > Okay, we are back to the fact that you are using STARTTLS, which I ask about > testing without STARTTLS a few of emails ago. > > In "SSL Proxy and TLS support" section, in the field, "How to Handle > STARTTLS Requests (DoTLS)" do you have "TLS to Proxy" selected? > > In "Transparent TCP Proxy Table* (ProxyConf)" is your hmailserver iP:port > set up? > > If you have TLS set up to proxy to your server, then ASSP CANNOT write the > header. ASSP is just passing encrypted packets from your PC to your server. > > Michael Thomas > > On 5/22/2013 5:32 PM, Nick Marshall wrote: >> The two lines that represent the email passing through ASSP are extracted > at the top of my last email. I just included the rest of the log showing the > start up in case it revealed anything. >> >> The mail is definitely passing through ASSP. The extract from the maillog > is here again.... >> >>>> -------------------------------------------------------------------- >>>> -------- >>>> ------- >>>> >>>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [NoProcessing] >>>> 77.36.34.43 <[email protected]> to: [email protected] message >>>> proxied without processing >>>> - (attachments unchecked) - (noProcessing) - [] >>>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [MessageOK] 77.36.34.43 >>>> <[email protected]> to: [email protected] message ok - >>>> (noProcessing) - [] >>>> >>>> -------------------------------------------------------------------- >>>> -------- >> >> Thanks >> Nick >> >> >> On 22 May 2013, at 21:10, Michael Thomas <[email protected]> wrote: >> >>> Nick, >>> >>> That log is a standard start up. There was no message processing in >>> the log. So, if that log file covered a time span in which you >>> delivered a message, it did not go through ASSP. I did not see a > connection logged. >>> >>> Side issue. Check your log for errors. Just glancing through, I noted >>> ClamAV is not available and your Regex Optimizer is too old. >>> >>> Michael Thomas >>> >>> On 5/22/2013 3:55 PM, Nick Marshall wrote: >>>> Below is the content of the maillog representing this message >>>> passing through ASSP v2 at the time of the headers: >>>> >>>> -------------------------------------------------------------------- >>>> -------- >>>> ------- >>>> >>>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [NoProcessing] >>>> 77.36.34.43 <[email protected]> to: [email protected] message >>>> proxied without processing >>>> - (attachments unchecked) - (noProcessing) - [] >>>> May-22-13 10:15:12 m-14111-06101 [Worker_1] [MessageOK] 77.36.34.43 >>>> <[email protected]> to: [email protected] message ok - >>>> (noProcessing) - [] >>>> >>>> -------------------------------------------------------------------- >>>> -------- >>>> ------- >>>> >>>> These are the only two lines in the log representing this message. >>>> >>>> This corresponds to the headers below: >>>> >>>> -------------------------------------------------------------------- >>>> -------- >>>> ------- >>>> >>>> Return-Path: <[email protected]> >>>> Received: from inbound104.mstream.com ([77.36.34.151]) >>>> by inbound102.mstream.com >>>> with hMailServer ; Wed, 22 May 2013 10:15:12 +0100 >>>> From: "test" <[email protected]> >>>> To: <[email protected]> >>>> Subject: test >>>> Date: Wed, 22 May 2013 10:15:14 +0100 >>>> Message-ID: <[email protected]> >>>> >>>> -------------------------------------------------------------------- >>>> -------- >>>> ------- >>>> >>>> Below is additional information from the maillog on starting the > service: >>>> >>>> May-22-13 10:13:47 [startup] Starting as a service >>>> May-22-13 10:13:50 [startup] ASSP-professional version 2.3.3(13137) >>>> (Perl >>>> 5.016002) (on MSWin32) initializing >>>> May-22-13 10:13:50 [startup] Info: registered encrypted >>>> POP3ConfigFile file c:/assp/files/pop3cfg.txt >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/MaxRealSize.txt' (MaxRealSizeAdr): >>>> No such file or directory >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/MaxRealSizeExt.txt' >>>> (MaxRealSizeExternalAdr): No such file or directory >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/MaxSize.txt' (MaxSizeAdr): No such >>>> file or directory >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/MaxSizeExt.txt' >>>> (MaxSizeExternalAdr): No such file or directory >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/noprocessingfrom.txt' >>>> (noProcessingFrom): No such file or directory >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/noprocessingdomains.txt' >>>> (noProcessingDomains): No such file or directory >>>> May-22-13 10:13:50 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/localdomains.txt' (localDomains): No >>>> such file or directory >>>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/nopbwhite.txt' (noPBwhite): No such >>>> file or directory >>>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/uriblwhite.txt' (URIBLwhitelist): No >>>> such file or directory >>>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/bombsenderre.txt' (bombSenderRe): No >>>> such file or directory >>>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/charsets.txt' (bombCharSets): No >>>> such file or directory >>>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/bombdatare.txt' (bombDataRe): No >>>> such file or directory >>>> May-22-13 10:13:51 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/suspiciousre.txt' >>>> (bombSuspiciousRe): No such file or directory >>>> May-22-13 10:13:52 [startup] Info: switched (DNS) nameserver order >>>> from to >>>> 45.125.48.31 , 45.125.48.32 , 77.36.34.33 >>>> May-22-13 10:13:52 [startup] Info: removed 0 config change schedules >>>> May-22-13 10:13:52 [startup] AdminInfo: failed to open option list >>>> file for reading 'c:/assp/files/notls.txt' (noTLSIP): No such file >>>> or directory >>>> May-22-13 10:13:52 [startup] Info: an ASSP restart will be done with: >>>> cmd.exe /C start "ASSPSMTP restarted" "C:\Perl64\bin\perl.exe" >>>> "c:\assp\c:\assp\assp.pl" "c:/assp" >>>> May-22-13 10:13:52 [startup] ASSP version 2.3.3(13137) (Perl >>>> 5.016002) (on MSWin32)running on server: inbound104 (77.36.34.151) >>>> May-22-13 10:13:52 [startup] Info: unicode support is available on >>>> that system >>>> May-22-13 10:13:52 [init] Info: analysing windows system environment >>>> May-22-13 10:13:52 [init] Info: windows system environment looks OK >>>> May-22-13 10:13:52 [init] Threads module 1.86 installed >>>> May-22-13 10:13:52 [init] Threads::shared module 1.42 installed >>>> May-22-13 10:13:52 [init] Thread::Queue module 2.12 installed >>>> May-22-13 10:13:52 [init] IO::Poll module 0.09 installed >>>> May-22-13 10:13:52 [init] IO::Select module 1.21 installed >>>> May-22-13 10:13:52 [init] ASSP is using IOEngine - Poll >>>> May-22-13 10:13:52 [init] Thread::State module version 0.09 >>>> installed and available >>>> May-22-13 10:13:52 [init] IO::Socket::INET6 module is not detected >>>> (enableIPv6 is not set). >>>> May-22-13 10:13:53 [init] File::Scan::ClamAV module version 1.8 >>>> installed but not available, error: Cannot connect to 'localhost:3310': >>>> IO::Socket::INET: connect: 10061 >>>> May-22-13 10:13:53 [init] Net::LDAP module version 0.53 installed >>>> and available >>>> May-22-13 10:13:53 [init] Net::DNS module version 0.72 installed and >>>> available >>>> May-22-13 10:13:53 [init] Email::Valid module version 0.190 >>>> installed and available >>>> May-22-13 10:13:53 [init] Net::SMTP module version 2.31 installed >>>> and available >>>> May-22-13 10:13:53 [init] Net::SMTP::TLS module version 0.12 >>>> installed and available >>>> May-22-13 10:13:53 [init] NetSNMP::agent module is not installed. >>>> May-22-13 10:13:53 [init] Mail::SPF::Query module version 1.999001 >>>> installed and available >>>> May-22-13 10:13:53 [init] Mail::SPF module version 2.008 installed >>>> and available >>>> May-22-13 10:13:53 [init] Mail::SRS module version 0.31 installed - >>>> Sender Rewriting Scheme available >>>> May-22-13 10:13:53 [init] Compress::Zlib module version 2.055 >>>> installed - HTTP compression available >>>> May-22-13 10:13:53 [init] Digest::MD5 module version 2.52 installed >>>> - delaying can use MD5 keys for hashes >>>> May-22-13 10:13:53 [init] Digest::SHA1 module version 2.13 installed >>>> - BATV and FBMTV check available >>>> May-22-13 10:13:53 [init] File::ReadBackwards module version 1.05 >>>> installed >>>> - searching of log files enabled >>>> May-22-13 10:13:53 [init] Time::HiRes module version 1.9725 >>>> installed - CPU usage statistics available >>>> May-22-13 10:13:53 [init] Sys::Syslog module version 0.32 installed >>>> - Unix centralized logging enabled >>>> May-22-13 10:13:53 [init] Net::Syslog module version 0.04 installed >>>> - network Syslog logging enabled >>>> May-22-13 10:13:53 [init] Win32::Daemon module version 20110117 >>>> installed - can run as Win32 service >>>> May-22-13 10:13:53 [init] Win32::API::OutputDebugString module is >>>> not installed - unable to debug to Win32 API >>>> May-22-13 10:13:53 [init] Unicode::GCString module version 2012.10 >>>> installed >>>> - can detect east asian language strings as sequence of UAX #29 >>>> Grapheme Clusters to analyze Bayes and HMM >>>> May-22-13 10:13:53 [init] Win32::Unicode module version 0.38 >>>> installed - can write unicode filenames to OS >>>> May-22-13 10:13:53 [init] Convert::Scalar module version 1.1 >>>> installed - can use optimized memory handling >>>> May-22-13 10:13:53 [init] Tie::RDBM module version 0.73 installed - >>>> database usage available >>>> May-22-13 10:13:53 [init] DB_File module is not installed - DB_File >>>> (Berkeley V1) database usage not available >>>> May-22-13 10:13:53 [init] BerkeleyDB module is not installed - >>>> Berkeley database usage not available >>>> May-22-13 10:13:53 [init] Info: griplist is using basic 'orderedtie' >>>> in file c:/assp/griplist >>>> May-22-13 10:13:53 [init] Net::CIDR::Lite module version 0.21 >>>> installed - hyphenated IP address range available >>>> May-22-13 10:13:53 [init] NetAddr::IP::Lite module version 1.05 >>>> installed - hyphenated IP and CIDR address range calculation >>>> available >>>> May-22-13 10:13:53 [init] Net::IP module version 1.26 installed - >>>> hyphenated IP and CIDR address range calculation available >>>> May-22-13 10:13:53 [init] Net::SenderBase module version 1.01 >>>> installed - Query the senderbase service available >>>> May-22-13 10:13:53 [init] LWP::Simple module version 6.00 installed >>>> - procedural LWP interface available >>>> May-22-13 10:13:53 [init] Email::MIME::Modifier module version 1.911 >>>> installed - MIME charset decoding and conversion interface and >>>> attachment detection available >>>> May-22-13 10:13:53 [init] MIME::Types module version 1.38 installed >>>> - TNEF conversion may possible >>>> May-22-13 10:13:53 [init] Email::Send module version 2.198 installed >>>> - sending .eml files available >>>> May-22-13 10:13:53 [init] Convert::TNEF module version 0.18 >>>> installed - TNEF conversion is available >>>> May-22-13 10:13:53 [init] Mail::DKIM::Verifier module is not >>>> installed - DKIM verification not available >>>> May-22-13 10:13:53 [init] Schedule::Cron module version 0.97 >>>> installed - RebuildSpamdb Scheduler is available >>>> May-22-13 10:13:53 [init] Sys::MemInfo module version 0.91 installed >>>> - memory calculation is available >>>> May-22-13 10:13:53 [init] Sys::CpuAffinity module version 1.06 >>>> installed - setting CPU Affinty is available - this system has 4 >>>> CPU's >>>> May-22-13 10:13:53 [init] The Cpu Affinity of assp is currently '0 1 2 > 3' >>>> May-22-13 10:13:53 [init] Authen::SASL module version 2.16 installed >>>> - SMTP AUTH is available >>>> May-22-13 10:13:53 [init] Regexp::Optimizer module is not installed >>>> - default Regular Expression Optimization is not available - regex >>>> processing will take approximately 3 times longer >>>> May-22-13 10:13:53 [init] Regex::Optimizer module with wrong version >>>> (1.11) installed (requires 1.12) - enhanced Regular Expression >>>> Optimization is not available - regex processing will take >>>> approximately 6 times longer >>>> May-22-13 10:13:53 [init] AsspSelfLoader module version 2.03 >>>> installed - ASSP Code Load Optimization is available >>>> May-22-13 10:13:53 [init] ASSP_WordStem module is not installed - >>>> ASSP multi lingual word stemming engine for Bayesian and HMM checks >>>> is not available >>>> May-22-13 10:13:53 [init] IO::Socket::SSL module version 1.77 >>>> installed - https and TLS/SSL is possible >>>> May-22-13 10:13:53 [init] Found valid certificate and private key >>>> file - https and TLS/SSL is available >>>> May-22-13 10:13:53 [init] Warning: There were module load errors >>>> detected - look in to file c:/assp/moduleLoadErrors.txt for more >>>> details. To solve this issue install the failed modules or disable them > in the 'Module Setup' >>>> section in the GUI. >>>> May-22-13 10:13:53 [init] Error: unclean shutdown of ASSP detected >>>> May-22-13 10:13:53 [init] Saving config >>>> May-22-13 10:13:53 [init] Info: saved config to c:/assp/assp.cfg.tmp >>>> - which is now renamed to c:/assp/assp.cfg >>>> May-22-13 10:13:53 [init] Finished saving config >>>> May-22-13 10:13:53 [init] Info: Whitelist loaded from >>>> c:/assp/whitelist with >>>> 0 records >>>> May-22-13 10:13:53 [init] Info: PersBlack loaded from >>>> c:/assp/persblack with >>>> 0 records >>>> May-22-13 10:13:53 [init] Info: Redlist loaded from c:/assp/redlist >>>> with 0 records >>>> May-22-13 10:13:53 [init] Info: Delay loaded from c:/assp/delaydb >>>> with 0 records >>>> May-22-13 10:13:53 [init] Info: DelayWhite loaded from >>>> c:/assp/delaydb.white with 0 records >>>> May-22-13 10:13:54 [init] Info: PBWhite loaded from >>>> c:/assp/pb/pbdb.white.db with 134528 records >>>> May-22-13 10:13:54 [init] Warning: PBWhite contains 134528 records >>>> (allocating at least 77.3MB) - it is highly recommended to use a >>>> database for 'pbdb' >>>> May-22-13 10:13:54 [init] Info: PBBlack loaded from >>>> c:/assp/pb/pbdb.black.db with 0 records >>>> May-22-13 10:13:54 [init] Info: RBLCache loaded from >>>> c:/assp/pb/pbdb.rbl.db with 0 records >>>> May-22-13 10:13:54 [init] Info: URIBLCache loaded from >>>> c:/assp/pb/pbdb.uribl.db with 0 records >>>> May-22-13 10:13:54 [init] Info: PTRCache loaded from >>>> c:/assp/pb/pbdb.ptr.db with 0 records >>>> May-22-13 10:13:54 [init] Info: MXACache loaded from >>>> c:/assp/pb/pbdb.mxa.db with 0 records >>>> May-22-13 10:13:54 [init] Info: RWLCache loaded from >>>> c:/assp/pb/pbdb.rwl.db with 0 records >>>> May-22-13 10:13:54 [init] Info: SPFCache loaded from >>>> c:/assp/pb/pbdb.spf.db with 0 records >>>> May-22-13 10:13:54 [init] Info: SBCache loaded from >>>> c:/assp/pb/pbdb.sb.db with 0 records >>>> May-22-13 10:13:54 [init] Info: PBTrap loaded from >>>> c:/assp/pb/pbdb.trap.db with 0 records >>>> May-22-13 10:13:54 [init] Info: DKIMCache loaded from >>>> c:/assp/pb/pbdb.dkim.db with 0 records >>>> May-22-13 10:13:54 [init] Info: BATVTag loaded from >>>> c:/assp/pb/pbdb.batv.db with 0 records >>>> May-22-13 10:13:54 [init] Info: BackDNS loaded from >>>> c:/assp/pb/pbdb.back.db with 0 records >>>> May-22-13 10:13:54 [init] Warning: unable to open c:/assp/spamdb to >>>> load Spamdb >>>> May-22-13 10:13:54 [init] Warning: unable to open >>>> c:/assp/spamdb.helo to load HeloBlack >>>> May-22-13 10:13:54 [init] Warning: unable to open c:/assp/HMMdb to >>>> load HMMdb >>>> May-22-13 10:13:54 [init] Info: LDAPlist loaded from >>>> c:/assp/ldaplist with 0 records >>>> May-22-13 10:13:54 [init] Starting maintenance worker thread [10000] >>>> - ThreadCycleTime is set to 3000 microseconds >>>> May-22-13 10:13:54 [Worker_10000] Info: switched (DNS) nameserver >>>> order from >>>> 46.175.48.31 , 46.175.48.32 , 77.36.34.33 to 77.36.34.33 , >>>> 46.175.48.31 , >>>> 46.175.48.32 >>>> May-22-13 10:13:54 [Worker_10000] Worker_10000 started >>>> May-22-13 10:13:54 [Worker_10000] Info: 0 records of PersBlack saved >>>> May-22-13 10:13:54 [init] Starting rebuild SpamDB worker thread >>>> [10001] - ThreadCycleTime is set to 30 microseconds >>>> May-22-13 10:13:54 [Worker_10001] Worker_10001 started >>>> May-22-13 10:13:54 [Worker_10001] Info: found module >>>> c:/assp/lib/rebuildspamdb.pm version 6.25 >>>> May-22-13 10:13:54 [init] Starting SMTP-worker-threads with >>>> ThreadCycleTime set to 3000 microseconds >>>> May-22-13 10:13:54 [init] Starting communication worker threads [1 >>>> to 15] >>>> May-22-13 10:13:55 [Worker_1] Worker_1 started >>>> May-22-13 10:13:55 [Worker_2] Worker_2 started >>>> May-22-13 10:13:55 [Worker_3] Worker_3 started >>>> May-22-13 10:13:56 [Worker_4] Worker_4 started >>>> May-22-13 10:13:56 [Worker_5] Worker_5 started >>>> May-22-13 10:13:56 [Worker_6] Worker_6 started >>>> May-22-13 10:13:56 [Worker_7] Worker_7 started >>>> May-22-13 10:13:57 [Worker_8] Worker_8 started >>>> May-22-13 10:13:57 [Worker_9] Worker_9 started >>>> May-22-13 10:13:57 [Worker_10] Worker_10 started >>>> May-22-13 10:13:57 [Worker_11] Worker_11 started >>>> May-22-13 10:13:58 [Worker_12] Worker_12 started >>>> May-22-13 10:13:58 [Worker_13] Worker_13 started >>>> May-22-13 10:13:58 [Worker_14] Worker_14 started >>>> May-22-13 10:13:58 [Worker_15] Worker_15 started >>>> May-22-13 10:13:59 [init] All Threads are started >>>> May-22-13 10:13:59 [init] Info: CPU priority changed for >>>> Worker_10000 from 0 to 2 >>>> May-22-13 10:13:59 [init] Info: CPU priority changed for >>>> Worker_10001 from 0 to 2 >>>> May-22-13 10:13:59 [init] Warning: Bayesian spam database has only 0 >>>> records >>>> May-22-13 10:13:59 [init] Warning: whitelist has only 0 records: >>>> (ignore if this is a new install) >>>> May-22-13 10:13:59 [init] Info: saving Stats in file asspstats.sav >>>> May-22-13 10:14:00 [init] Listening for SMTP connections on >>>> 0.0.0.0:25 >>>> May-22-13 10:14:01 [init] Listening for SMTPS (SSL) connections on >>>> 0.0.0.0:465 >>>> May-22-13 10:14:01 [init] Listening for admin HTTP connections on >>>> 0.0.0.0:55555 0.0.0.0:22222 >>>> May-22-13 10:14:01 [init] Listening for stat HTTP connections on >>>> 0.0.0.0:55553 >>>> May-22-13 10:14:01 [init] Listening for additional SMTP connections >>>> on >>>> 0.0.0.0:587 >>>> May-22-13 10:14:01 [init] Current PID: 3356 >>>> May-22-13 10:14:01 [init] Info: command queue released >>>> May-22-13 10:14:01 [init] Info: central signalhandler - ABRT(22) - >>>> BREAK(21) >>>> - NUM19(19) - FPE(8) - NUM12(12) - NUM16(16) - NUM18(18) - NUM17(17) >>>> - >>>> STOP(23) - NUM24(24) - NUM10(10) - SEGV(11) - QUIT(3) - KILL(9) - >>>> PIPE(13) - >>>> NUM05(5) - CONT(25) - NUM06(6) - NUM07(7) - ILL(4) - INT(2) - HUP(1) >>>> - >>>> TERM(15) - CHLD(20) - CLD(26) - ALRM(14) - installed >>>> >>>> >>>> Nick >>>> >>>> >>>> -----Original Message----- >>>> From: Fritz Borgstedt [mailto:[email protected]] >>>> Sent: 22 May 2013 18:14 >>>> To: For Users of ASSP >>>> Subject: Re: [Assp-user] Missing 'Received' headers in ASSP v2 >>>> >>>> For Users of ASSP <[email protected]> schreibt: >>>>> It certainly looks as if the message is not passing through v2, but >>>>> it is. >>>> >>>> >>>> You should find the mail in Maillog then. >>>> >>>> -------------------------------------------------------------------- >>>> -------- >>>> -- >>>> Try New Relic Now & We'll Send You this Cool Shirt New Relic is the >>>> only SaaS-based application performance monitoring service that >>>> delivers powerful full stack analytics. Optimize and monitor your >>>> browser, app, & servers with just a few lines of code. Try New Relic >>>> and get this awesome Nerd Life shirt! >>>> http://p.sf.net/sfu/newrelic_d2d_may >>>> _______________________________________________ >>>> Assp-user mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/assp-user >>>> >>>> >>>> >>>> >>>> ______________________________________________ >>>> Giacom email security by www.messagestream.com >>>> >>>> >>>> >>>> >>>> >>>> -------------------------------------------------------------------- >>>> ---------- Try New Relic Now & We'll Send You this Cool Shirt New >>>> Relic is the only SaaS-based application performance monitoring >>>> service that delivers powerful full stack analytics. Optimize and >>>> monitor your browser, app, & servers with just a few lines of code. >>>> Try New Relic and get this awesome Nerd Life shirt! >>>> http://p.sf.net/sfu/newrelic_d2d_may >>>> _______________________________________________ >>>> Assp-user mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/assp-user >>> >>> --------------------------------------------------------------------- >>> --------- Try New Relic Now & We'll Send You this Cool Shirt New >>> Relic is the only SaaS-based application performance monitoring >>> service that delivers powerful full stack analytics. Optimize and >>> monitor your browser, app, & servers with just a few lines of code. >>> Try New Relic and get this awesome Nerd Life shirt! >>> http://p.sf.net/sfu/newrelic_d2d_may >>> _______________________________________________ >>> Assp-user mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/assp-user >>> >>> >>> >> >> >> ---------------------------------------------------------------------- >> -------- Try New Relic Now & We'll Send You this Cool Shirt New Relic >> is the only SaaS-based application performance monitoring service that >> delivers powerful full stack analytics. Optimize and monitor your >> browser, app, & servers with just a few lines of code. Try New Relic >> and get this awesome Nerd Life shirt! >> http://p.sf.net/sfu/newrelic_d2d_may >> _______________________________________________ >> Assp-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/assp-user >> > > ---------------------------------------------------------------------------- > -- > Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only > SaaS-based application performance monitoring service that delivers powerful > full stack analytics. Optimize and monitor your browser, app, & servers with > just a few lines of code. Try New Relic and get this awesome Nerd Life > shirt! http://p.sf.net/sfu/newrelic_d2d_may > _______________________________________________ > Assp-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-user > > > > > > ------------------------------------------------------------------------------ > Try New Relic Now & We'll Send You this Cool Shirt > New Relic is the only SaaS-based application performance monitoring service > that delivers powerful full stack analytics. Optimize and monitor your > browser, app, & servers with just a few lines of code. Try New Relic > and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_may > _______________________________________________ > Assp-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-user > ------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_may _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user
