Hi Melisa,
We've havnt used these devices, so can't help specifically, however you do
need to make sure that you have sufficent distance between the various bits
of equipment - do not site the antenna, gateway and ATA close together. If
possible site all three items 3-4 yards/metres apart from each other
minimum.
Linus
----- Original Message -----
From: "Melisa Teoh" <[EMAIL PROTECTED]>
To: "Commercial and Business-Oriented Asterisk Discussion"
<asterisk-biz@lists.digium.com>
Sent: Tuesday, November 08, 2005 2:49 AM
Subject: [Asterisk-biz] Asterisk integration with 2N Easy Gate Analog
GSMGateway
Has anyone on the list integrated this 2N mobile gateway with Asterisk
successfully?
We have tested it under two scenarios - connected directly to a Zap
channel on a digium card and via an ATA w/ PSTN gateway port.
In both cases, we are experiencing poor call quality with a high degree of
static interference, apparently from the GSM radio. Similar to what you
hear if you are in the middle of a conversation on a traditional desktop
phone with your mobile sitting near by and an incoming call comes in on
the mobile.
Any advice on how this issue might be resolved would be greatly
appreciated.
Thank you.
Melisa.
P/S: We have also written to 2N and contacted their distributor but have
yet to receive a response.
_______________________________________________
Asterisk-Biz mailing list
Asterisk-Biz@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-biz
_______________________________________________
Asterisk-Biz mailing list
Asterisk-Biz@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-biz