|
Hi Andrew,
Thanks for the reaction. The situation remains
the same. As soon as I try to get the FXO module configured Asterisk stops
running.
No matter how I call that module (3 or 4) it
simply doesn't work; and reports the error mentioned in my previous email, which
is
ERROR[517]: Unable to register channel '4'
WARNING[517]: chan_zap.so: load_module failed, returning -1 WARNING[517]: Loading module chan_zap.so failed! Please note that "ztcfg -vvv" correctly
maps all 3 channels, 1-2 as FXS and 3 (or event. 4) as FXO
<<Confirm how many modules are on the card by looking at
it, if it is configured as suggested you have 3 of the four modules.
>>
The TDM21B card has, as per Digium's, two (2) FXS
modules and 1 (one) FXO module. I did my best to thoroughly follow the Digium's
installation instructions given in my previous email, at no avail. I
even sent them a request for support (before addressing it to this mailing
list), their answer was simply this "Digium does
not support FreeBSD, either freely or commercially."
If I knew this I wouldn't not acquire the
board... or at least not the FXO module.
Thks
Lai
|
_______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
