Title: Zaptel X100P card dropping calls

Hi,
        I'm not sure if this is a zaptel-bsd driver problem or asterisk.  I have looked through the archives with out much luck.

        I have a X100P Clone Card.  It works perfectly find under linux.  I'm now trying to get Asterisk 1.0.7 (from the ports) working under FreeBSD 5.3.  I have tried the zaptel drivers from the ports collection and also the latest SVN snapshot with the same results.

        When I dial the number of the POTS line that the zaptel card is connected to, asterisk detects the incoming call.  The line rings 3 time (one more after the Answer("Zap/1-1", "") line shows on asterisk).  Then the line is dropped by the X100P card.  Asterisk doesn't seem to detect the dropped call because it goes on to try and play the background message I have and then eventually times out.  I get the Timeout message long after the call is already dropped.

        Here is what I see under asterisk:

         -- Starting simple switch on 'Zap/1-1'
        May  2 16:15:37 NOTICE[55666]: chan_zap.c:5626 ss_thread: Got event 2 (Ring/Answered)...
        -- Executing Answer("Zap/1-1", "") in new stack
        -- Executing BackGround("Zap/1-1", "demo-instruct") in new stack
        -- Playing 'demo-instruct' (language 'en')
        May  2 16:16:55 WARNING[55666]: pbx.c:1949 ast_pbx_run: Timeout, but no rule 't' in context 'default'
        -- Hungup 'Zap/1-1'

        Any ideas where to begin trouble shooting this?

        Here is the zaptel device information from dmesg

        May  1 11:33:17 devel kernel: Zapata Telephony Interface Registered on major 196
        May  1 11:33:17 devel kernel: ZapTel device: vendor=e159 device=1 subvendor=8086
        May  1 11:33:17 devel kernel: wcfxo0: <Generic Clone> port 0x9800-0x98ff mem 0xf9023000-0xf9023fff irq 22 at device 11.0 on pci2

        May  1 11:33:17 devel kernel: ZapTel Attach for wcfxo0: deviceID : 0xe159
        May  1 11:33:17 devel kernel: wcfxo0: [GIANT-LOCKED]
        May  1 11:33:18 devel kernel: wcfxo: DAA mode is 'FCC'
        May  1 11:33:18 devel kernel: Found a Wildcard FXO: Generic Clone
        May  1 11:33:18 devel kernel: ZapTel device loaded.
        May  1 11:33:42 devel kernel: Registered tone zone 0 (United States / North America)

----- Kirk

_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd

Reply via email to