no idea about 5.3 but things do work for me on FreeBSD 4.11 with
the driver in the ports (patched to fix a bug in the loader glue
that should affect only  4.x)

cheers
luigi

On Mon, May 02, 2005 at 04:28:59PM -0600, Kirk Davis wrote:
> Hi,
>       I'm not sure if this is a zaptel-bsd driver problem or asterisk.  I
> have looked through the archives with out much luck.
> 
>       I have a X100P Clone Card.  It works perfectly find under linux.
> I'm now trying to get Asterisk 1.0.7 (from the ports) working under FreeBSD
> 5.3.  I have tried the zaptel drivers from the ports collection and also the
> latest SVN snapshot with the same results.
> 
>       When I dial the number of the POTS line that the zaptel card is
> connected to, asterisk detects the incoming call.  The line rings 3 time
> (one more after the Answer("Zap/1-1", "") line shows on asterisk).  Then the
> line is dropped by the X100P card.  Asterisk doesn't seem to detect the
> dropped call because it goes on to try and play the background message I
> have and then eventually times out.  I get the Timeout message long after
> the call is already dropped.
> 
>       Here is what I see under asterisk:
> 
>        -- Starting simple switch on 'Zap/1-1'
>       May  2 16:15:37 NOTICE[55666]: chan_zap.c:5626 ss_thread: Got event
> 2 (Ring/Answered)...
>       -- Executing Answer("Zap/1-1", "") in new stack
>       -- Executing BackGround("Zap/1-1", "demo-instruct") in new stack
>       -- Playing 'demo-instruct' (language 'en')
>       May  2 16:16:55 WARNING[55666]: pbx.c:1949 ast_pbx_run: Timeout, but
> no rule 't' in context 'default'
>       -- Hungup 'Zap/1-1'
> 
>       Any ideas where to begin trouble shooting this?
> 
>       Here is the zaptel device information from dmesg
> 
>       May  1 11:33:17 devel kernel: Zapata Telephony Interface Registered
> on major 196
>       May  1 11:33:17 devel kernel: ZapTel device: vendor=e159 device=1
> subvendor=8086
>       May  1 11:33:17 devel kernel: wcfxo0: <Generic Clone> port
> 0x9800-0x98ff mem 0xf9023000-0xf9023fff irq 22 at device 11.0 on pci2
>       May  1 11:33:17 devel kernel: ZapTel Attach for wcfxo0: deviceID :
> 0xe159
>       May  1 11:33:17 devel kernel: wcfxo0: [GIANT-LOCKED]
>       May  1 11:33:18 devel kernel: wcfxo: DAA mode is 'FCC'
>       May  1 11:33:18 devel kernel: Found a Wildcard FXO: Generic Clone
>       May  1 11:33:18 devel kernel: ZapTel device loaded.
>       May  1 11:33:42 devel kernel: Registered tone zone 0 (United States
> / North America)
> 
> ----- Kirk

> _______________________________________________
> Asterisk-BSD mailing list
> [email protected]
> http://lists.digium.com/mailman/listinfo/asterisk-bsd

_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd

Reply via email to