Yes, please have a look at my port, you need to install
http://www.shellbang.org/files/liblinuxcapi.tar.gz too. Maybe the used archive is no longer available, so pls contact me and I will put that on my site, too. Jan -----Original Message----- > Date: Tue, 24 May 2005 18:34:33 +0200 > Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI > From: Chris Stenton <[EMAIL PROTECTED]> > To: [email protected] > Ok, > > _cword is defined in capiutils.h which is not part of c4b nor your > port. > There is a copy in the isdn4k-utils is that what you used? > > Chris > > > On Tue, 2005-05-24 at 16:17 +0100, Chris Stenton wrote: > > > Yes I patched 5.4 for c4b and it seems to work. > > > > > > you can get the new chan_capi version from here > > > > http://www.junghanns.net/asterisk/downloads/chan_capi-0.4.0-PRE1.tar.gz > > > > The only thing I am stuck on is what the def for _cword is which I > > notice is still in your port. > > If I get time I will have a more detailed look. > > > > Chris > > > > ----- Original Message ----- > > From: <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, May 24, 2005 1:40 PM > > Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI > > > > > > > > > Only small changes needed... > > > > > > the original LINUX version had some wrong coded lines (like > > > reading from the writing side of a pipe, that is working on LINUX > > > because they are using unix sockets for pipe implementation) that > > > should be fixed by Mr. > > > Junghanns (i sent him the patches). > > > Additionally you need to use some CAPI4BSD headers, i try to make > > > a patch for 0.4 if you tell me where to download from (pls gimme > > > some days, cause my development notebook has burned out and I need > > > to code on my server :( ). > > > > > > Do you have C4B already installed? > > > > > > Jan > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Chris > > > Stenton > > > Sent: Tuesday, May 24, 2005 1:17 PM > > > To: Asterisk on BSD discussion > > > Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI > > > > > > Jan, > > > > > > Have you tried CHAN_CAPI.0.4.PRE1 I notice it has some FreeBSD > > > support in chan_capi.c. I can't use your port as I run CVS head > > > which needs the newer version. I can't compile this newer version > > > with asterisk cvs head. What should I redfine _cword to be? > > > > > > Chris > > > > > > > > > On Tue, 2005-05-24 at 07:47 +0200, [EMAIL PROTECTED] wrote: > > > > Hi, > > > > > > > > you can use any AVM active card (e.g. AVM B1 for a single BRI) > > > > and chan_capi for this purpose. > > > > You need my ports found on http://www.shellbang.org > > > > > > > > Jan > > > > > > > > > > > > -----Original Message----- > > > > > > > > > Date: Mon, 23 May 2005 21:42:09 +0200 > > > > > Subject: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI > > > > > From: Cian Hughes <[EMAIL PROTECTED]> > > > > > To: [email protected] > > > > > > > > > Hello all, I am new to this list and to asterisk but am a long > > > > > time BSD user (though rather lacking in Linux knowledge) and > > > > > would like > > > to > > > > > install Asterisk on a spare box to act as a PBX at home, > > > > > basically I'm going to route most of my calls over IP, but for > > > > > incoming, emergency, toll free, faxes, etc I want to use ISDN > > > > > (EuroISDN I'm in Ireland). > > > > > I have one sticking point, I don't really want four BRIs so > > > > > the quadBRI seems like overkill. However I'm still undecided > > > > > on what > > > card > > > > > to buy, since this is nothing mission critical I would > > > > > initially > > > like > > > > > to start with a cheap passive card, and if all doesn't go well > > > > > i'll buy something better. Anyway could I please have everyone > > > > > and anyone's experience of ISDN on FreeBSD, what cards are > > > > > supported, what cards work well? > > > > > > > > > > Also has any one managed Direct Inward Dialling rules with > > > > > ISDN and Asterisk on freebsd (I have 4 MSN's that I would like > > > > > to use)? > > > > > Yours Gratefully, Cian. > > > > > _______________________________________________ > > > > > Asterisk-BSD mailing list > > > > > [email protected] > > > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Asterisk-BSD mailing list > > > > [email protected] > > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd > > > -- > > > > > > _______________________________________________ > > > Asterisk-BSD mailing list > > > [email protected] > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Asterisk-BSD mailing list > > > [email protected] > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd > > > > > > > _______________________________________________ > > Asterisk-BSD mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-bsd > -- > > _______________________________________________ > Asterisk-BSD mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-bsd _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
