Jan,
Thanks I had not spotted that port. Let me know how you get on with 0.4-PRE.
Chris
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "Asterisk on BSD discussion" <[email protected]>
Sent: Wednesday, May 25, 2005 6:52 AM
Subject: Re: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
Yes,
please have a look at my port, you need to install
http://www.shellbang.org/files/liblinuxcapi.tar.gz
too. Maybe the used archive is no longer available, so pls contact me
and I will put that on my site, too.
Jan
-----Original Message-----
Date: Tue, 24 May 2005 18:34:33 +0200
Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
From: Chris Stenton <[EMAIL PROTECTED]>
To: [email protected]
Ok,
_cword is defined in capiutils.h which is not part of c4b nor your
port.
There is a copy in the isdn4k-utils is that what you used?
Chris
On Tue, 2005-05-24 at 16:17 +0100, Chris Stenton wrote:
> Yes I patched 5.4 for c4b and it seems to work.
>
>
> you can get the new chan_capi version from here
>
>
http://www.junghanns.net/asterisk/downloads/chan_capi-0.4.0-PRE1.tar.gz
>
> The only thing I am stuck on is what the def for _cword is which I
> notice is still in your port.
> If I get time I will have a more detailed look.
>
> Chris
>
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Tuesday, May 24, 2005 1:40 PM
> Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
>
>
>
> > Only small changes needed...
> >
> > the original LINUX version had some wrong coded lines (like
> > reading from the writing side of a pipe, that is working on LINUX
> > because they are using unix sockets for pipe implementation) that
> > should be fixed by Mr.
> > Junghanns (i sent him the patches).
> > Additionally you need to use some CAPI4BSD headers, i try to make
> > a patch for 0.4 if you tell me where to download from (pls gimme
> > some days, cause my development notebook has burned out and I need
> > to code on my server :( ).
> >
> > Do you have C4B already installed?
> >
> > Jan
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Chris
> > Stenton
> > Sent: Tuesday, May 24, 2005 1:17 PM
> > To: Asterisk on BSD discussion
> > Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
> >
> > Jan,
> >
> > Have you tried CHAN_CAPI.0.4.PRE1 I notice it has some FreeBSD
> > support in chan_capi.c. I can't use your port as I run CVS head
> > which needs the newer version. I can't compile this newer version
> > with asterisk cvs head. What should I redfine _cword to be?
> >
> > Chris
> >
> >
> > On Tue, 2005-05-24 at 07:47 +0200, [EMAIL PROTECTED] wrote:
> > > Hi,
> > >
> > > you can use any AVM active card (e.g. AVM B1 for a single BRI)
> > > and chan_capi for this purpose.
> > > You need my ports found on http://www.shellbang.org
> > >
> > > Jan
> > >
> > >
> > > -----Original Message-----
> > >
> > > > Date: Mon, 23 May 2005 21:42:09 +0200
> > > > Subject: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
> > > > From: Cian Hughes <[EMAIL PROTECTED]>
> > > > To: [email protected]
> > >
> > > > Hello all, I am new to this list and to asterisk but am a long
> > > > time BSD user (though rather lacking in Linux knowledge) and
> > > > would like
> > to
> > > > install Asterisk on a spare box to act as a PBX at home,
> > > > basically I'm going to route most of my calls over IP, but for
> > > > incoming, emergency, toll free, faxes, etc I want to use ISDN
> > > > (EuroISDN I'm in Ireland).
> > > > I have one sticking point, I don't really want four BRIs so
> > > > the quadBRI seems like overkill. However I'm still undecided
> > > > on what
> > card
> > > > to buy, since this is nothing mission critical I would
> > > > initially
> > like
> > > > to start with a cheap passive card, and if all doesn't go well
> > > > i'll buy something better. Anyway could I please have everyone
> > > > and anyone's experience of ISDN on FreeBSD, what cards are
> > > > supported, what cards work well?
> > > >
> > > > Also has any one managed Direct Inward Dialling rules with
> > > > ISDN and Asterisk on freebsd (I have 4 MSN's that I would like
> > > > to use)?
> > > > Yours Gratefully, Cian.
> > > > _______________________________________________
> > > > Asterisk-BSD mailing list
> > > > [email protected]
> > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> > > >
> > >
> > >
> > > _______________________________________________
> > > Asterisk-BSD mailing list
> > > [email protected]
> > > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> > --
> >
> > _______________________________________________
> > Asterisk-BSD mailing list
> > [email protected]
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> >
> >
> >
> >
> >
> > _______________________________________________
> > Asterisk-BSD mailing list
> > [email protected]
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> >
>
> _______________________________________________
> Asterisk-BSD mailing list
> [email protected]
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
--
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
