Hi all, I have a QuadBRI ISDN interface with Asterisk (bristuff 1.2.13). I have FreeBSD 6.1 and installed asterisk-bristuff, zaptel, libpri-bristuff from ports.
Situation: A SIP phone calls another party over ISDN (Zap channel). The called party OR the calling party hang's up. The problem is that the ISDN line is not hungup at the Asterisk side. Only when both sides hangup the isdn channel is hungup. Eg: someone in a car is called by me at a SIP phone via Asterisk and ISDN channel. When I hangup, the other person driving presumes the GSM mobile phone is hungup. It is NOT the case. With "bri debug span 2" (in my case) I see a difference when calling or called via ISDN. When called the line is hungup with the event PRI_EVENT_HANGUP. When calling via ISDN, I see "Zap x/x hungup ACK", after the event PRI_EVENT_HANGUP_ACK. There is no action on the event PRI_EVENT_HANGUP. I have the Dial command with the 'g' option, like Dial(Zap/g1,120,rg). Have someone encountered this problem? Is there a solutions? With kind regards, Pim van Stam Key Solutions The Netherlands _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
