Hi! On Thu, Nov 30, 2006 at 10:03:16AM +0100, Pim van Stam wrote:
> I have a QuadBRI ISDN interface with Asterisk (bristuff 1.2.13). I have > FreeBSD 6.1 and installed asterisk-bristuff, zaptel, libpri-bristuff > from ports. > > Situation: A SIP phone calls another party over ISDN (Zap channel). The > called party OR the calling party hang's up. The problem is that the > ISDN line is not hungup at the Asterisk side. Only when both sides > hangup the isdn channel is hungup. > > Eg: someone in a car is called by me at a SIP phone via Asterisk and > ISDN channel. When I hangup, the other person driving presumes the GSM > mobile phone is hungup. It is NOT the case. > > With "bri debug span 2" (in my case) I see a difference when calling or > called via ISDN. > When called the line is hungup with the event PRI_EVENT_HANGUP. When > calling via ISDN, I see "Zap x/x hungup ACK", after the event > PRI_EVENT_HANGUP_ACK. There is no action on the event PRI_EVENT_HANGUP. > > I have the Dial command with the 'g' option, like Dial(Zap/g1,120,rg). > > Have someone encountered this problem? Is there a solutions? > > With kind regards, What asterisk-bristuff version do you use? Please try to update to 1.2.13_2. Previous versions did not build libpri stuff in chan_zap.ko properly. /fjoe _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
