I have a gateway using a Digium card to convert a PRI call to a sip call then I transport the sip call to a Cisco IAD where it is converted back to a PRI. This all works well except DTMF is sent with a duration of .25sec. PRI specs says this should be .25sec to .5sec so this is with in spec, however the PBX on the other side of the IAD does not reliable work with the DTMF tones the minimum allowable length. I found in the INFO packets where the DTMF is set to a duration or 250, I would like to change this to 500.
Which file and class would be the correct place to change this value at? ============== INFO packet options I would like to change ============== Content-Type: application/dtmf-relay Content-Length: 24 Signal=5 Duration=250 ============== _______________________________________________ Asterisk-Dev mailing list Asterisk-Dev@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev