Here is System and Users:
/etc/dahdi/system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Mon Jul 13 17:53:33 2009 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) fxsks=1 echocanceller=mg2,1 fxsks=2 echocanceller=mg2,2 fxsks=3 echocanceller=mg2,3 fxsks=4 echocanceller=mg2,4 # Span 2: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" fxsks=5 echocanceller=mg2,5 fxsks=6 echocanceller=mg2,6 fxsks=7 echocanceller=mg2,7 fxsks=8 echocanceller=mg2,8 # Span 3: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" fxoks=9 echocanceller=mg2,9 fxoks=10 echocanceller=mg2,10 fxoks=11 echocanceller=mg2,11 fxoks=12 echocanceller=mg2,12 # Global data loadzone = us defaultzone = us /etc/asterisk/users.conf ;! ;! Automatically generated configuration file ;! Filename: users.conf (/etc/asterisk/users.conf) ;! Generator: Manager ;! Creation Date: Tue Jul 14 16:53:55 2009 ;! ; ; User configuration ; ; Creating entries in users.conf is a "shorthand" for creating individual ; entries in each configuration file. Using users.conf is not intended to ; provide you with as much flexibility as using the separate configuration ; files (e.g. sip.conf, iax.conf, etc) but is intended to accelerate the ; simple task of adding users. Note that creating individual items (e.g. ; custom SIP peers, IAX friends, etc.) will allow you to override specific ; parameters within this file. Parameter names here are the same as they ; appear in the other configuration files. There is no way to change the ; value of a parameter here for just one subsystem. ; [general] ; ; Full name of a user ; fullname = New User ; ; Starting point of allocation of extensions ; userbase = 6000 ; ; Create voicemail mailbox and use use macro-stdexten ; hasvoicemail = yes ; ; Set voicemail mailbox 6000 password to 1234 ; vmsecret = 1234 ; ; Create SIP Peer ; hassip = yes ; ; Create IAX friend ; hasiax = yes ; ; Create H.323 friend ; ;hash323 = yes ; Create manager entry ; hasmanager = no ; ; Set permissions for manager entry (see manager.conf.sample for documentation) ; (defaults to *all* permissions) ;managerread = system,call,log,verbose,command,agent,user,config ;managerwrite = system,call,log,verbose,command,agent,user,config ; ; Remaining options are not specific to users.conf entries but are general. ; callwaiting = yes threewaycalling = yes callwaitingcallerid = yes transfer = yes canpark = yes cancallforward = yes callreturn = yes callgroup = 1 pickupgroup = 1 vmexten = 7000 ;[6000] ;fullname = Joe User ;email = [email protected] ;secret = 1234 ;zapchan = 1 ;hasvoicemail = yes ;vmsecret = 1234 ;hassip = yes ;hasiax = no ;hash323 = no ;hasmanager = no ;callwaiting = no ;context = international [trunk_1] trunkname = CBTrunk ; GUI metadata busydetect = yes busycount = 3 busypattern = 500,500 ringtimeout = 8000 answeronpolarityswitch = no hanguponpolarityswitch = no callprogress = no progzone = us usecallerid = yes cidstart = ring pulsedial = nodisallow = all allow = all gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 1 gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 2 gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 3 gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 4 gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 5 gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 6 gui_volume = 3 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 2 txgain = 0.0 channel = 7 [6001] username = 6001 transfer = yes mailbox = 6001 call-limit = 100 type = peer fullname = Margie Mogle registersip = no host = dynamic callgroup = 1 type = peer context = DLPN_DialPlan1 cid_number = 6001 hasvoicemail = yes vmsecret = email = threewaycalling = no hasdirectory = yes callwaiting = no hasmanager = yes hasagent = yes hassip = yes hasiax = no secret = nat = yes canreinvite = no dtmfmode = rfc2833 insecure = no pickupgroup = 1 autoprov = no label = macaddress = linenumber = 1 LINEKEYS = 1 managerread = system,call,log,verbose,command,agent,user,config,originate managerwrite = system,call,log,verbose,command,agent,user,config,originate disallow = all allow = ulaw,gsm,alaw,speex,g726 [6002] username = 6002 transfer = yes mailbox = 6002 call-limit = 100 type = peer fullname = Bob Crandell registersip = no host = dynamic callgroup = 1 type = peer context = DLPN_DialPlan1 cid_number = 6002 hasvoicemail = yes vmsecret = email = threewaycalling = yes hasdirectory = yes callwaiting = yes hasmanager = yes hasagent = yes hassip = yes hasiax = no secret = nat = yes canreinvite = no dtmfmode = rfc2833 insecure = no pickupgroup = 1 signalling = fxo_ks flash = 750 rxflash = 1250 autoprov = no label = macaddress = linenumber = 2 LINEKEYS = 1 managerread = system,call,log,verbose,command,agent,user,config,originate managerwrite = system,call,log,verbose,command,agent,user,config,originate dahdichan = 9 disallow = all allow = ulaw,gsm,alaw,speex,g726 [6003] username = 6003 transfer = yes mailbox = 6003 call-limit = 100 type = peer fullname = Brett Ansite registersip = no host = dynamic callgroup = 1 type = peer context = DLPN_DialPlan1 cid_number = 6003 hasvoicemail = yes vmsecret = email = threewaycalling = no hasdirectory = yes callwaiting = no hasmanager = yes hasagent = yes hassip = yes hasiax = no secret = nat = yes canreinvite = no dtmfmode = rfc2833 insecure = no pickupgroup = 1 autoprov = no label = macaddress = linenumber = 3 LINEKEYS = 1 managerread = system,call,log,verbose,command,agent,user,config,originate managerwrite = system,call,log,verbose,command,agent,user,config,originate disallow = all allow = ulaw,gsm,alaw,speex,g726 [6004] username = 6004 transfer = yes mailbox = 6004 call-limit = 100 type = peer fullname = Mike Owen registersip = no host = dynamic callgroup = 1 type = peer context = DLPN_DialPlan1 cid_number = 6004 hasvoicemail = yes vmsecret = email = threewaycalling = yes hasdirectory = yes callwaiting = yes hasmanager = yes hasagent = yes hassip = yes hasiax = no secret = nat = yes canreinvite = no dtmfmode = rfc2833 insecure = no pickupgroup = 1 signalling = fxo_ks flash = 750 rxflash = 1250 autoprov = no label = macaddress = linenumber = 4 LINEKEYS = 1 managerread = system,call,log,verbose,command,agent,user,config,originate managerwrite = system,call,log,verbose,command,agent,user,config,originate dahdichan = 10 disallow = all allow = ulaw,gsm,alaw,speex,g726 [6005] username = 6005 transfer = yes mailbox = 6005 call-limit = 100 type = peer fullname = Tim Hughes registersip = no host = dynamic callgroup = 1 type = peer context = DLPN_DialPlan1 cid_number = 6005 hasvoicemail = yes vmsecret = email = threewaycalling = yes hasdirectory = yes callwaiting = yes hasmanager = yes hasagent = yes hassip = yes hasiax = no secret = nat = yes canreinvite = no dtmfmode = rfc2833 insecure = no pickupgroup = 1 signalling = fxo_ks flash = 750 rxflash = 1250 autoprov = no label = macaddress = linenumber = 5 LINEKEYS = 1 managerread = system,call,log,verbose,command,agent,user,config,originate managerwrite = system,call,log,verbose,command,agent,user,config,originate dahdichan = 11 disallow = all allow = ulaw,gsm,alaw,speex,g726 [6006] username = 6006 transfer = yes mailbox = 6006 call-limit = 100 type = peer fullname = FAX registersip = no host = dynamic callgroup = 1 type = peer context = DLPN_DialPlan1 cid_number = 6006 hasvoicemail = no vmsecret = email = threewaycalling = no hasdirectory = no callwaiting = no hasmanager = no hasagent = yes hassip = yes hasiax = no secret = nat = yes canreinvite = no dtmfmode = rfc2833 insecure = no pickupgroup = 6 signalling = fxo_ks flash = 750 rxflash = 1250 autoprov = no label = macaddress = linenumber = 6 LINEKEYS = 1 dahdichan = 12 disallow = all allow = ulaw,gsm,alaw,speex,g726 [trunk_2] trunkname = FAXTrunk busydetect = yes busycount = 3 busypattern = 500,500 ringtimeout = 8000 answeronpolarityswitch = no hanguponpolarityswitch = no callprogress = no progzone = us usecallerid = yes cidstart = ring pulsedial = no cidsignalling = bell flash = 750 rxflash = 1250 mailbox = callerid = asreceived dahdichan = 8 context = DID_trunk_2 group = 2 hasexten = no hasiax = no hassip = no registeriax = no registersip = no trunkstyle = analog disallow = all allow = all signalling = fxs_ks channel = 8 cidsignalling = bell flash = 750 rxflash = 1250 mailbox = 6002 callerid = asreceived dahdichan = 1,2,3,4,5,6,7 context = DID_trunk_1 group = 1 hasexten = no hasiax = no hassip = no registeriax = no registersip = no trunkstyle = analog >>> Matt Sales <[email protected]> 7/14/2009 05:47 PM >>> Bob, can you paste your /etc/dahdi/system.conf, users.conf, and extensions.conf? Also if you are connected to analog lines have you run fxotune? On Tue, Jul 14, 2009 at 11:45 AM, Bob Crandell <[email protected]> wrote: Hi All, Thanks to the help I'm getting here I can now make calls and the voice quality sounds pretty good. An incoming call does not get answered. This is the log: Connected to Asterisk 1.6.0.9 currently running on PBX (pid = 5068) Verbosity is at least 6 -- Starting simple switch on 'DAHDI/1-1' [Jul 14 08:33:01] NOTICE[5692]: chan_dahdi.c:7490 ss_thread: Got event 18 (Ring Begin)... [Jul 14 08:33:03] NOTICE[5692]: chan_dahdi.c:7490 ss_thread: Got event 2 (Ring/Answered)... -- Executing [...@did_trunk_1:1] ExecIf("DAHDI/1-1", "1?SetCallerPres(unavailable)") in new stack -- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN' -- Hungup 'DAHDI/1-1' -- Starting simple switch on 'DAHDI/1-1' [Jul 14 08:33:13] NOTICE[5697]: chan_dahdi.c:7490 ss_thread: Got event 18 (Ring Begin)... [Jul 14 08:33:15] NOTICE[5697]: chan_dahdi.c:7490 ss_thread: Got event 2 (Ring/Answered)... -- Executing [...@did_trunk_1:1] ExecIf("DAHDI/1-1", "1?SetCallerPres(unavailable)") in new stack -- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN' -- Hungup 'DAHDI/1-1' -- Starting simple switch on 'DAHDI/1-1' [Jul 14 08:33:29] WARNING[5704]: chan_dahdi.c:7634 ss_thread: CallerID returned with error on channel 'DAHDI/1-1' -- Executing [...@did_trunk_1:1] ExecIf("DAHDI/1-1", "1?SetCallerPres(unavailable)") in new stack -- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN' -- Hungup 'DAHDI/1-1' It's says (Ring/Answered)... but it doesn't go to an extension or voice mail. I have incoming calling rules defined. I've tried directing the calls to a ring group, a voice mail and an extension. No joy. This is running on openSuSE 11.1 fully patched and running asterisk16-1.6.0.9-73.18. Asterisk GUI-version : SVN-branch-2.0-r4970 Will you help me track this down? Thanks Bob Crandell Assured Computing, Inc. 541-868-0331 ComputerBase USA 541-349-0404 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
