I think I see your problem. In users.conf you need to add context=DID_trunk_1 for [trunk_1]. It currently has no context to Asterisk doesn't know what to do with calls coming in on channels 1-7. Once you add that, calls will then land in the [DID_trunk_1] context in extensions.conf where you have your time based rules.
Also, in extensions.conf under [globals] you need to change the trunk_2 varialbe from trunk_2 = DAHDI/trunk_2 to trunk_2 = DAHDI/g2. Good Luck On Thu, Jul 16, 2009 at 1:05 PM, Bob Crandell <[email protected]> wrote: > Here is System and Users: > > > /etc/dahdi/system.conf > # Autogenerated by /usr/sbin/dahdi_genconf on Mon Jul 13 17:53:33 2009 > # If you edit this file and execute /usr/sbin/dahdi_genconf again, > # your manual changes will be LOST. > # Dahdi Configuration File > # > # This file is parsed by the Dahdi Configurator, dahdi_cfg > # > # Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) > fxsks=1 > echocanceller=mg2,1 > fxsks=2 > echocanceller=mg2,2 > fxsks=3 > echocanceller=mg2,3 > fxsks=4 > echocanceller=mg2,4 > > # Span 2: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" > fxsks=5 > echocanceller=mg2,5 > fxsks=6 > echocanceller=mg2,6 > fxsks=7 > echocanceller=mg2,7 > fxsks=8 > echocanceller=mg2,8 > > # Span 3: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" > fxoks=9 > echocanceller=mg2,9 > fxoks=10 > echocanceller=mg2,10 > fxoks=11 > echocanceller=mg2,11 > fxoks=12 > echocanceller=mg2,12 > > # Global data > > loadzone = us > defaultzone = us > /etc/asterisk/users.conf > ;! > ;! Automatically generated configuration file > ;! Filename: users.conf (/etc/asterisk/users.conf) > ;! Generator: Manager > ;! Creation Date: Tue Jul 14 16:53:55 2009 > ;! > ; > ; User configuration > ; > ; Creating entries in users.conf is a "shorthand" for creating individual > ; entries in each configuration file. Using users.conf is not intended to > ; provide you with as much flexibility as using the separate configuration > ; files (e.g. sip.conf, iax.conf, etc) but is intended to accelerate the > ; simple task of adding users. Note that creating individual items (e.g. > ; custom SIP peers, IAX friends, etc.) will allow you to override specific > ; parameters within this file. Parameter names here are the same as they > ; appear in the other configuration files. There is no way to change the > ; value of a parameter here for just one subsystem. > ; > > [general] > ; > ; Full name of a user > ; > fullname = New User > ; > ; Starting point of allocation of extensions > ; > userbase = 6000 > ; > ; Create voicemail mailbox and use use macro-stdexten > ; > hasvoicemail = yes > ; > ; Set voicemail mailbox 6000 password to 1234 > ; > vmsecret = 1234 > ; > ; Create SIP Peer > ; > hassip = yes > ; > ; Create IAX friend > ; > hasiax = yes > ; > ; Create H.323 friend > ; > ;hash323 = yes > ; Create manager entry > ; > hasmanager = no > ; > ; Set permissions for manager entry (see manager.conf.sample for > documentation) > ; (defaults to *all* permissions) > ;managerread = system,call,log,verbose,command,agent,user,config > ;managerwrite = system,call,log,verbose,command,agent,user,config > ; > ; Remaining options are not specific to users.conf entries but are general. > ; > callwaiting = yes > threewaycalling = yes > callwaitingcallerid = yes > transfer = yes > canpark = yes > cancallforward = yes > callreturn = yes > callgroup = 1 > pickupgroup = 1 > vmexten = 7000 > > ;[6000] > ;fullname = Joe User > ;email = [email protected] > ;secret = 1234 > ;zapchan = 1 > ;hasvoicemail = yes > ;vmsecret = 1234 > ;hassip = yes > ;hasiax = no > ;hash323 = no > ;hasmanager = no > ;callwaiting = no > ;context = international > > [trunk_1] > trunkname = CBTrunk ; GUI metadata > busydetect = yes > busycount = 3 > busypattern = 500,500 > ringtimeout = 8000 > answeronpolarityswitch = no > hanguponpolarityswitch = no > callprogress = no > progzone = us > usecallerid = yes > cidstart = ring > pulsedial = nodisallow = all > allow = all > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 1 > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 2 > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 3 > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 4 > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 5 > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 6 > gui_volume = 3 ; GUI metadata > signalling = fxs_ks > gui_fxooffset = 0 ; GUI metadata > rxgain = 2 > txgain = 0.0 > channel = 7 > > [6001] > username = 6001 > transfer = yes > mailbox = 6001 > call-limit = 100 > type = peer > fullname = Margie Mogle > registersip = no > host = dynamic > callgroup = 1 > type = peer > context = DLPN_DialPlan1 > cid_number = 6001 > hasvoicemail = yes > vmsecret = > email = > threewaycalling = no > hasdirectory = yes > callwaiting = no > hasmanager = yes > hasagent = yes > hassip = yes > hasiax = no > secret = > nat = yes > canreinvite = no > dtmfmode = rfc2833 > insecure = no > pickupgroup = 1 > autoprov = no > label = > macaddress = > linenumber = 1 > LINEKEYS = 1 > managerread = system,call,log,verbose,command,agent,user,config,originate > managerwrite = system,call,log,verbose,command,agent,user,config,originate > disallow = all > allow = ulaw,gsm,alaw,speex,g726 > > [6002] > username = 6002 > transfer = yes > mailbox = 6002 > call-limit = 100 > type = peer > fullname = Bob Crandell > registersip = no > host = dynamic > callgroup = 1 > type = peer > context = DLPN_DialPlan1 > cid_number = 6002 > hasvoicemail = yes > vmsecret = > email = > threewaycalling = yes > hasdirectory = yes > callwaiting = yes > hasmanager = yes > hasagent = yes > hassip = yes > hasiax = no > secret = > nat = yes > canreinvite = no > dtmfmode = rfc2833 > insecure = no > pickupgroup = 1 > signalling = fxo_ks > flash = 750 > rxflash = 1250 > autoprov = no > label = > macaddress = > linenumber = 2 > LINEKEYS = 1 > managerread = system,call,log,verbose,command,agent,user,config,originate > managerwrite = system,call,log,verbose,command,agent,user,config,originate > dahdichan = 9 > disallow = all > allow = ulaw,gsm,alaw,speex,g726 > > [6003] > username = 6003 > transfer = yes > mailbox = 6003 > call-limit = 100 > type = peer > fullname = Brett Ansite > registersip = no > host = dynamic > callgroup = 1 > type = peer > context = DLPN_DialPlan1 > cid_number = 6003 > hasvoicemail = yes > vmsecret = > email = > threewaycalling = no > hasdirectory = yes > callwaiting = no > hasmanager = yes > hasagent = yes > hassip = yes > hasiax = no > secret = > nat = yes > canreinvite = no > dtmfmode = rfc2833 > insecure = no > pickupgroup = 1 > autoprov = no > label = > macaddress = > linenumber = 3 > LINEKEYS = 1 > managerread = system,call,log,verbose,command,agent,user,config,originate > managerwrite = system,call,log,verbose,command,agent,user,config,originate > disallow = all > allow = ulaw,gsm,alaw,speex,g726 > > [6004] > username = 6004 > transfer = yes > mailbox = 6004 > call-limit = 100 > type = peer > fullname = Mike Owen > registersip = no > host = dynamic > callgroup = 1 > type = peer > context = DLPN_DialPlan1 > cid_number = 6004 > hasvoicemail = yes > vmsecret = > email = > threewaycalling = yes > hasdirectory = yes > callwaiting = yes > hasmanager = yes > hasagent = yes > hassip = yes > hasiax = no > secret = > nat = yes > canreinvite = no > dtmfmode = rfc2833 > insecure = no > pickupgroup = 1 > signalling = fxo_ks > flash = 750 > rxflash = 1250 > autoprov = no > label = > macaddress = > linenumber = 4 > LINEKEYS = 1 > managerread = system,call,log,verbose,command,agent,user,config,originate > managerwrite = system,call,log,verbose,command,agent,user,config,originate > dahdichan = 10 > disallow = all > allow = ulaw,gsm,alaw,speex,g726 > > > [6005] > username = 6005 > transfer = yes > mailbox = 6005 > call-limit = 100 > type = peer > fullname = Tim Hughes > registersip = no > host = dynamic > callgroup = 1 > type = peer > context = DLPN_DialPlan1 > cid_number = 6005 > hasvoicemail = yes > vmsecret = > email = > threewaycalling = yes > hasdirectory = yes > callwaiting = yes > hasmanager = yes > hasagent = yes > hassip = yes > hasiax = no > secret = > nat = yes > canreinvite = no > dtmfmode = rfc2833 > insecure = no > pickupgroup = 1 > signalling = fxo_ks > flash = 750 > rxflash = 1250 > autoprov = no > label = > macaddress = > linenumber = 5 > LINEKEYS = 1 > managerread = system,call,log,verbose,command,agent,user,config,originate > managerwrite = system,call,log,verbose,command,agent,user,config,originate > dahdichan = 11 > disallow = all > allow = ulaw,gsm,alaw,speex,g726 > > [6006] > username = 6006 > transfer = yes > mailbox = 6006 > call-limit = 100 > type = peer > fullname = FAX > registersip = no > host = dynamic > callgroup = 1 > type = peer > context = DLPN_DialPlan1 > cid_number = 6006 > hasvoicemail = no > vmsecret = > email = > threewaycalling = no > hasdirectory = no > callwaiting = no > hasmanager = no > hasagent = yes > hassip = yes > hasiax = no > secret = > nat = yes > canreinvite = no > dtmfmode = rfc2833 > insecure = no > pickupgroup = 6 > signalling = fxo_ks > flash = 750 > rxflash = 1250 > autoprov = no > label = > macaddress = > linenumber = 6 > LINEKEYS = 1 > dahdichan = 12 > disallow = all > allow = ulaw,gsm,alaw,speex,g726 > > [trunk_2] > trunkname = FAXTrunk > busydetect = yes > busycount = 3 > busypattern = 500,500 > ringtimeout = 8000 > answeronpolarityswitch = no > hanguponpolarityswitch = no > callprogress = no > progzone = us > usecallerid = yes > cidstart = ring > pulsedial = no > cidsignalling = bell > flash = 750 > rxflash = 1250 > mailbox = > callerid = asreceived > dahdichan = 8 > context = DID_trunk_2 > group = 2 > hasexten = no > hasiax = no > hassip = no > registeriax = no > registersip = no > trunkstyle = analog > disallow = all > allow = all > signalling = fxs_ks > channel = 8 > cidsignalling = bell > flash = 750 > rxflash = 1250 > mailbox = 6002 > callerid = asreceived > dahdichan = 1,2,3,4,5,6,7 > context = DID_trunk_1 > group = 1 > hasexten = no > hasiax = no > hassip = no > registeriax = no > registersip = no > trunkstyle = analog > > > > >>> Matt Sales <[email protected]> 7/14/2009 05:47 PM >>> > Bob, can you paste your /etc/dahdi/system.conf, users.conf, and > extensions.conf? Also if you are connected to analog lines have you run > fxotune? > > > On Tue, Jul 14, 2009 at 11:45 AM, Bob Crandell <[email protected]> > wrote: > > Hi All, > > > Thanks to the help I'm getting here I can now make calls and the voice > quality sounds pretty good. > > > An incoming call does not get answered. This is the log: > Connected to Asterisk 1.6.0.9 currently running on PBX (pid = 5068) > Verbosity is at least 6 > -- Starting simple switch on 'DAHDI/1-1' > [Jul 14 08:33:01] NOTICE[5692]: chan_dahdi.c:7490 ss_thread: Got event 18 > (Ring Begin)... > [Jul 14 08:33:03] NOTICE[5692]: chan_dahdi.c:7490 ss_thread: Got event 2 > (Ring/Answered)... > -- Executing [...@did_trunk_1:1] ExecIf("DAHDI/1-1", > "1?SetCallerPres(unavailable)") in new stack > -- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN' > -- Hungup 'DAHDI/1-1' > -- Starting simple switch on 'DAHDI/1-1' > [Jul 14 08:33:13] NOTICE[5697]: chan_dahdi.c:7490 ss_thread: Got event 18 > (Ring Begin)... > [Jul 14 08:33:15] NOTICE[5697]: chan_dahdi.c:7490 ss_thread: Got event 2 > (Ring/Answered)... > -- Executing [...@did_trunk_1:1] ExecIf("DAHDI/1-1", > "1?SetCallerPres(unavailable)") in new stack > -- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN' > -- Hungup 'DAHDI/1-1' > -- Starting simple switch on 'DAHDI/1-1' > [Jul 14 08:33:29] WARNING[5704]: chan_dahdi.c:7634 ss_thread: CallerID > returned with error on channel 'DAHDI/1-1' > -- Executing [...@did_trunk_1:1] ExecIf("DAHDI/1-1", > "1?SetCallerPres(unavailable)") in new stack > -- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN' > -- Hungup 'DAHDI/1-1' > > It's says (Ring/Answered)... but it doesn't go to an extension or voice > mail. > > > I have incoming calling rules defined. I've tried directing the calls to a > ring group, a voice mail and an extension. No joy. > This is running on openSuSE 11.1 fully patched and running > asterisk16-1.6.0.9-73.18. > Asterisk GUI-version : SVN-branch-2.0-r4970 > > > Will you help me track this down? > Thanks > > > > > Bob Crandell > Assured Computing, Inc. > 541-868-0331 > ComputerBase USA > 541-349-0404 > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-gui mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-gui > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-gui mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-gui >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
