Anyway for this to work, I mean rsa authentication: on the host that is defined as switch you have to have this lines
[username] auth=rsa,md5,plaintext secret=[key] ; note the brackets they are important
and on the other host you have to have this in your extensions.conf
switch => username:[EMAIL PROTECTED] ; again note the brackets
What I was missing was that secret=[key] statament on the recieving side, and that auth has to be not only rsa. I do not know why is it this way but at leat looking at the packet dump with ethereal it was saying in packets sent to the host defined in the switch => " rsasecret= <secret string>". So I guess it works.
Anybody can confirm that this is the right way to configure this, and this is the way to go?
Anton Yurchenko wrote:
Mark Spencer wrote:OK I seem to not have problems using switch => with other then rsa authentication, and I seem to not have problems with rsa authentication in general, the register => in iax.conf works, and if I forward the calls via extension => statament, the also get through fine and * says that the call is AUTHENTICATED.
Looks as though there may be a problem with RSA key authentication and switch for some reason... Does it behave different with either no authentication, or password authentication?
Mark
But the switch => plus rsa auth , do not want to play together, I have simptoms as I described above.
I`m running ( now ) the todays version of CVS. Todays that is as of 10:00 AM GMT + 3 Jul 04 2003.
--
Anton Yurchenko<[EMAIL PROTECTED]> Digital Generation
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
