Anyone having problems getting transfer to work here is the answer... It appears the manual is incorrect..
The manual says: 1)Press "Transfer" button. 2)Dial the target extension. 3)Hangup the phone. This will disconnect the call.. Here is how it can be done.. Matteo gave this solution.. (thanks) NOTE:'Use # as Dial Key:' must be set to YES To trasnfer: 1)Press "Transfer" button. 2)Dial the target extension. 3)Press "#" key. The call is transfered and you can hangup. If you are like me and have extensions that use the "#" in your dilaplan this will cause problems so then you can do the following.. NOTE:'Use # as Dial Key:' must be set to NO To Transfer: 1)Press "Transfer" button. 2)Dial Target extension. 3)Press "Redial" button. The call is transfered and you can hangup. Hope that helps someone.. Thanks again to Matteo.. Later.. > For me works, providing that: > > * 'Use # as Dial Key:' must be set to yes > > And to trasnfer you do the following: > receive a call > press trasnfer > dial the exten + # > > the call is trasnferred now. > > if you simply dial the exten + hangup as stated in the manual, > that doesn't work (also if 'Use # as Dial Key:' is set to no) > > Matteo. > > > Il mar, 2003-07-15 alle 10:46, WipeOut . ha scritto: > > Yes, The External NTP issue has been around for a while now.. I was hoping it > > would be fixed in this release.. > > > > Also the ability transfer a call using the "Transfer" button is still broken.. > > (Unless it requires some special configuration to make it work with *)... Anyone > > know?? > > > > These problems are not listed in the "Known Problems" section of the release notes > > for .77 release.. > > > > > > > > > Hi > > > > > > I upgraded earlier today and so far have found that if the Daylight Saving > > > option is on one hour is added to the time received from the NTP server > > > regardless of date. > > > > > > This is using my internal NTP server but I can't get it to work with any > > > external NTP server, it simply does not download the date > > > > > > Other than this I have seen no change since I upgraded. > > > > > > Although there appears to be no Release notes with this release > > > > > > Regards > > > Paul > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of Brancaleoni > > > Matteo > > > Sent: 14 July 2003 20:42 > > > To: [EMAIL PROTECTED] > > > Subject: [Asterisk-Users] New budgetone firmware > > > > > > > > > Hi. > > > Has anyone experienced with the new firmware .77 ? > > > There's Day Light Saving time now, but haven't > > > time to play with it, till now. > > > > > > Matteo. > > > > > > -- > > > Matteo Brancaleoni > > > Espia System Administrator - IT services > > > Website : http://www.espia.it > > > Email : [EMAIL PROTECTED] > > > > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users