Thanks WEll, not sure how to do that.Anyway.
I will move * on one of our internet servers. That should "take away" all NAT/PAT issues. Senad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nathan Littlepage Sent: 09 August 2003 11:53 To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] X-Lite - No sound + chan_sip issue You might look into PAT to forward your RTP traffic to the asterisk boxes. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of WipeOut . > Sent: Saturday, August 09, 2003 2:37 AM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] X-Lite - No sound + chan_sip issue > > > If I am understanding correctly your setup looks like this.. > > {Asterisk}--[NAT]--Internet--[NAT]--{X-Lite} > > If this is correct then you are going to have major problems > getting it to work.. Your RTP traffic is going to get very confused.. > > You need to get Asterisk onto a Public IP address.. > > I have seen many try and get the double NAT setup to work but > I haven't yet heard of anyone getting it right.. > > > > > Hi, > > thanks for that. > > > > after implementing yours and "wipeout's" suggestions (thank > you both), > > x-lite changed its default codecs to G711a. which is > great... and a way > > forward. > > > > but it still does not play sound when the "1000" is dialed. > > > > my * is behind nat. and my test pc is as well. > > Here are my settings: > > > > sip.conf > > [senad] > > type=friend > > secret=blah > > host=dynamic > > dtmfmode=inband > > > > thanks > > > > senad > > > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Nathan > > Littlepage > > Sent: 08 August 2003 19:50 > > To: [EMAIL PROTECTED] > > Subject: RE: [Asterisk-Users] X-Lite - No sound + chan_sip issue > > > > > > Change the allow=all in sip.conf to allow=alaw and see if > that works. > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > Senad Jordanovic > > > Sent: Friday, August 08, 2003 1:14 PM > > > To: [EMAIL PROTECTED] > > > Subject: [Asterisk-Users] X-Lite - No sound + chan_sip issue > > > > > > > > > Hi, > > > > > > X-Lite logs into * with no problems. I dial "1000" and * > > > plays greeting, but > > > i can not hear it. > > > Tried many times with the same result. > > > > > > After quite few tries * complains about: > > > ------------------------------------------------- > > > WARNING[81926]: File chan_sip.c, Line 388 (retrans_pkt): > > > Maximum retries > > > exceeded on call > > > [EMAIL PROTECTED] for > > > seqno 43 (Response) > > > WARNING[81926]: File chan_sip.c, Line 2002 > > > (__transmit_response): Unable to > > > determine sequence number from '' > > > ------------------------------------------------- > > > > > > > > > > > > Has anyone had the same problem? > > > > > > Senad > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > ______________________________________________ > http://www.linuxmail.org/ > Now with e-mail forwarding for only US$5.95/yr > > Powered by Outblaze > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users