Make sure you are using G.711a, G.711u or GSM codecs.. I have not been able to get iLBC to work and someone the other days couuld not get SPX working..
You will need to enable/disable the codecs in X-Lite.. If you also want to control the codecs that * uses then put the following in the general section of your sip.conf disallow=all allow=alaw allow=ulaw allow=gsm Hope that helps.. > Hi, > > X-Lite logs into * with no problems. I dial "1000" and * plays greeting, but > i can not hear it. > Tried many times with the same result. > > After quite few tries * complains about: > ------------------------------------------------- > WARNING[81926]: File chan_sip.c, Line 388 (retrans_pkt): Maximum retries > exceeded on call [EMAIL PROTECTED] for > seqno 43 (Response) > WARNING[81926]: File chan_sip.c, Line 2002 (__transmit_response): Unable to > determine sequence number from '' > ------------------------------------------------- > > > > Has anyone had the same problem? > > Senad > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users