Andy Powell wrote:
Can't find the message in a search.. but below is a msg retreved from my archive..
this is what Mark sent a little while ago....
I have no idea if it actually does anything to the card, but on a modprobe I do get a msg saying it's using CTR21
AndyI'm in Paris right now and can't test this change, but I've been researching the DAA and there are a few international settings I can change, so I've changed the driver in CVS so that you can specify the operational mode. Try "modprobe wcfxo opermode=1" if you're in most of Europe and that should switch to CTR21 mode which slightly modifies a few of the electrical characteristics of the DAA.
As we add modes you'll be able to see them with "modprobe wcfxo opermode=-1" and then doing a dmesg.
Anyway all you folks that had some trouble like this try it out and let me know if it makes any difference.
Mark
I guess in his haste to help out the people who were having a problem, Mark looked at the wrong data sheet when he wrote this patch.
I have corresponded with him and confirmed that this code requires the Global DAA chipset, which is not fitted to the current X100P cards.
The mail I was referring to is: http://lists.digium.com/pipermail/asterisk-users/2003-August/017825.html
Regards,
Richard
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users