Also try to see the debug on the console (edit /etc/asterisk/logger.conf and put console => .....,debug) and restart asterisk in the console (-c)
Then you should see what telco sends us. It might be that they use some diffrent standard than *ANI*DNIS* and sometimes instead of * they use #. regards Martin On Wed, 3 Sep 2003, Paulo Mannheimer wrote: > Hi, > > I'm testing an E1 with E&M signaling. Some of the problems I'm running > into are the following: > > 1) if I try to configure any channel above channel 15, I start > getting a "multiframe alignment error" on my telco test equipment. So I > have my zaptel file only configured for 15 channels, like this > > span=1,1,0,cas,hdb3 > e&m=1-15 > > 2) When the test equipment tries to send me a DTMF string, I only > get the first one. > > Any thoughts? > > Best, > > PauloHM > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users