Re: [Asterisk-Users] IAX2 ports usage

[denzel-infotechs]

HI! but when making iax2 calls, a packet monitor would only reveal this UDP port. (Between two * servers) ??????     4569  proto: U   ( I would assume even the RTP headers get enclosed by UDP, so there should have been more UDP port variants. Not the case when monitored.)   I've got these in my rtp.conf     rtpstart=10000     rtpend=20000 Does it mean RTP use the above udp port range ?( 10000~20000).   denzel   ----- Original Message ----- From: Wade J. Weppler To: [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 8:42 AM Subject: RE: [Asterisk-Users] IAX2 ports usage The RDP packets need to be dealt with as well.   They are specified in rtp.conf   -wade   -----Original Message----- From: denzel-infotechs [mailto:[EMAIL PROTECTED] Sent: Thursday, September 04, 2003 12:29 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] IAX2 ports usage   hi all !     we've got IAX2 protocol working between several Asterisk servers. Now we are concerned with doing bandwidth management to maintain an acceptable voice quality. We thought of prioritizing the udp traffic. ( Giving a high priority to those IAX2 udp ports.)     I know that IAX2 uses udp/4569. Is there any other traffic/ports that we need to consider for bandwidth shaping w.r.t IAX2.   DenZel.