Yes, The RTP ports in * are configurable in rtp.conf.. The default is 10000 - 20000
Later > HI! > but when making iax2 calls, a packet monitor would only reveal this UDP port. > (Between two * servers) ?????? > 4569 proto: U > > ( I would assume even the RTP headers get enclosed by UDP, so there should have been > more UDP port variants. Not the case when monitored.) > > I've got these in my rtp.conf > rtpstart=10000 > rtpend=20000 > Does it mean RTP use the above udp port range ?( 10000~20000). > > denzel > > ----- Original Message ----- > From: Wade J. Weppler > To: [EMAIL PROTECTED] > Sent: Thursday, September 04, 2003 8:42 AM > Subject: RE: [Asterisk-Users] IAX2 ports usage > > > The RDP packets need to be dealt with as well. > > > > They are specified in rtp.conf > > > > -wade > > > > -----Original Message----- > From: denzel-infotechs [mailto:[EMAIL PROTECTED] > Sent: Thursday, September 04, 2003 12:29 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] IAX2 ports usage > > > > hi all ! > > we've got IAX2 protocol working between several Asterisk servers. Now we are > concerned with doing bandwidth management to maintain an acceptable voice quality. > We thought of prioritizing the udp traffic. ( Giving a high priority to those IAX2 > udp ports.) > > I know that IAX2 uses udp/4569. Is there any other traffic/ports that we need > to consider for bandwidth shaping w.r.t IAX2. > > > > DenZel. > -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users