I checked the same link (http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO), and the two fritzcards work when I receive calls, but when I make a call (or more calls), asterisk only uses my second controller Il gio, 2003-09-04 alle 11:53, Marian Danisek ha scritto: > Dňa Št, 2003-09-04 at 11:40, Jamie Neil napísal: > > Simone Vasoli (BK s.r.l.) wrote: > > > Hi, > > > when I make a call, chan_capi always uses controller 2, and never uses > > > controller 1 (so I have 4 lines for incoming calls, but only 2 lines > > > instead of 4 for outgoing calls). > > > > > > this is with 2 AVM Fritz cards PCI. > > > > You can only use one Fritz PCI card per box due to a limitation built > > into the AVM CAPI driver. > > > check this link - is describe how to use more than one fcpci in pc. I > personally use 3 cards im my computers, without problems... > > http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO > > > However you can get around this by hacking the (binary) fcpci kernel > > module and changing the name of second and subsequent modules. I haven't > > tried it personally, but I think there are several people who are using > > this technique sucessfully :). > > > > Just in case anyone is interested, AVM also say that you can't use the > > Fritz card and the B1 card in the same box. However I have found it > > seems to work fine provided the B1 CAPI driver is loaded *after* the > > Fritz driver. -- _______________________________ Simone Vasoli BK s.r.l. - Brain and Knowledge
e-mail: [EMAIL PROTECTED] cell: +39 348 0830539 tel: 0187 1874200 _______________________________ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users