Does the registration show up?
try "sip show registry" at the CLI
also try "sip debug peer sip_proxy" and post the result.
Might be able to see what's going on there...
mark
On 7/1/05, David <[EMAIL PROTECTED]> wrote:
Hi,
I have been trying to configure my Asterisk to use a Sip provider for
out and incoming calls.
I only have one user and password for connect to my sip provider.
My sip.conf is:
[general]
;disallow=gsm
;allow=ulaw
port = 5060 ; Port to bind to
bindaddr = 0.0.0.0 ; Address to bind to
context = default ; Default for incoming calls
callerid=No CallID
register => user:[EMAIL PROTECTED]
[sip_proxy]
type=friend
username=user
fromuser=user
secret=password
host=siprovider
dtmfmode=inband
The problem is:
If i put in the [sip_proxy] section type=friend, incoming calls doesn't
works. If the type is set to another value (for example peer) incoming
calls works fine, but outgoing calls doesn't works.
What can I do?
Thanks
David
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
regards,
Mark P. Edwards
TEL:+61 408 601 107
SKYPE: mark.p.edwards
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
