> I am trying the setup the TDM01B card. 1 FXO. I > connected it to a regular home line. in the > /etc/zaptel.conf, I have > fxsls=4 > In the /etc/asterisk/zapata.conf > I have: > signaling=fxs_ls > language=en > group=1 > context=default > channel => 4 > > When I start asterisk, I get this error: > ERROR[10376]: chan_zap.c:6584 mkintf; Signaling > requested on channel 4 is FXO Loopstart but line is in > FXS Loopstart Signaling > > chan_zap.c:9927 setup_zap: Unable to register channel > '4' > > Maybe I have something misconfigured. However, I > triead all combinations and it doesn't seem to work. > > If I take away those lines. Asterisk comes up and in > zaptel show command, I see the TDM400P card. > Please help. > Thanks
What do you see listed in 'dmesg'? It should look something like: Module 0: Installed -- AUTO FXO (FCC mode) Module 1: Installed -- AUTO FXO (FCC mode) Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC mode) (The above example is from a TDM with four fxo modules installed.) What do you see listed in 'ztcfg -vv'? It should look something like: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) (Again, the above is from a TDM with four fxo modules, each configured for Kewlstart, not loopstart.) If you're not seeing entries similar to the above, I'd have to guess that changes made to /etc/zaptel.conf and /etc/asterisk/zapata.conf are probably out of sync. (Meaning changes have been made to one or the other without restarting asterisk AND zaptel.) _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users