Hello everyone, Does anyone have experience with echo calibration for TDM card with rxgain and txgain (Zapata.conf) and ztmonitor (CVS Head)?
I have found very few information about it and what I have found makes me confused. I have a phone number provided by my TelCo(1004 hz at 0db) and from what I saw, I am supposed to calibrate my rxgain to get a 14800 value with ztmonitor . Here is the information I found: http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.ht ml Does anyone have successfully reduced echo with this procedure? My main problem is that when I get 14800 with ztmonitor, I have now a rxgain=14 and it seem to be too high for asterisk and I cannot dial out anymore. Any suggestions? Thanks in advance for your pointers Regards Ken _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users