I did go through the zapata.conf and zaptel.conf but
no luck after changing switchtype=euroisdn
Still having the same problem...
My zaptel.conf config: -
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
bchan=17-31
dchan=16
loadzone = us
defaultzone=us
Here is my result of my command "ztcfg -vvv" : -
Zaptel Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet
(DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default)
(Slaves: 01)
Channel 02: Individual Clear channel (Default)
(Slaves: 02)
Channel 03: Individual Clear channel (Default)
(Slaves: 03)
Channel 04: Individual Clear channel (Default)
(Slaves: 04)
Channel 05: Individual Clear channel (Default)
(Slaves: 05)
Channel 06: Individual Clear channel (Default)
(Slaves: 06)
Channel 07: Individual Clear channel (Default)
(Slaves: 07)
Channel 08: Individual Clear channel (Default)
(Slaves: 08)
Channel 09: Individual Clear channel (Default)
(Slaves: 09)
Channel 10: Individual Clear channel (Default)
(Slaves: 10)
Channel 11: Individual Clear channel (Default)
(Slaves: 11)
Channel 12: Individual Clear channel (Default)
(Slaves: 12)
Channel 13: Individual Clear channel (Default)
(Slaves: 13)
Channel 14: Individual Clear channel (Default)
(Slaves: 14)
Channel 15: Individual Clear channel (Default)
(Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default)
(Slaves: 17)
Channel 18: Individual Clear channel (Default)
(Slaves: 18)
Channel 19: Individual Clear channel (Default)
(Slaves: 19)
Channel 20: Individual Clear channel (Default)
(Slaves: 20)
Channel 21: Individual Clear channel (Default)
(Slaves: 21)
Channel 22: Individual Clear channel (Default)
(Slaves: 22)
Channel 23: Individual Clear channel (Default)
(Slaves: 23)
Channel 24: Individual Clear channel (Default)
(Slaves: 24)
Channel 25: Individual Clear channel (Default)
(Slaves: 25)
Channel 26: Individual Clear channel (Default)
(Slaves: 26)
Channel 27: Individual Clear channel (Default)
(Slaves: 27)
Channel 28: Individual Clear channel (Default)
(Slaves: 28)
Channel 29: Individual Clear channel (Default)
(Slaves: 29)
Channel 30: Individual Clear channel (Default)
(Slaves: 30)
Channel 31: Individual Clear channel (Default)
(Slaves: 31)
31 channels configured.
--- dbruce <[EMAIL PROTECTED]> wrote:
> First off... go through your zapata.conf and
> zaptel.conf files and actually
> set your configuration for your specific hardware
> and desired results.
>
> The obvious is that you are using E1 signalling (set
> in zaptel.conf), but in
> zapata.conf you specify switchtype=national. This
> probably not work because
> national ISDN is a T1 protocol, and is usually not
> provisioned on E1
> circuits unless your provider is using some really
> strange combination of
> equipment.
>
> On an E1 circuit, you should have
> switchtype=euroisdn.
>
> Try this change and see if it resolves your problem.
> Also increase your
> debugging ( use 'pri debug span 1' or 'pri intense
> debug span 1') to see
> what messages are being passed between your system
> and the provider.
>
> Regards,
> Derek
>
>
> ----- Original Message -----
> From: "root linux" <[EMAIL PROTECTED]>
> To: "Asterisk Users Mailing List - Non-Commercial
> Discussion"
> <asterisk-users@lists.digium.com>
> Sent: Tuesday, August 23, 2005 4:48 AM
> Subject: Re: [Asterisk-Users] Unable to create
> channel of type 'Zap'
>
>
> > My context in zapata.conf is default
> >
> > But still cannot dial via Zaptel (TE110P)
> >
> >
> >
> > --- Craig Guy <[EMAIL PROTECTED]> wrote:
> >
> > > Hi rootlinux,
> > >
> > > I'm in Australia where we also uses crc4 on the
> span
> > > line, could you also
> > > show the relevant section of your zapata.conf?
> > > Looking at your
> > > extensions.conf excerpt, it is customary to
> group
> > > the b channels eg
> > > Dial(Zap/g1/12345678) and there should be an
> entry
> > > in zapata.conf under your
> > > channel definitions such as group=>1. Also
> check
> > > that your context in
> > > zapata.conf matches the extensions.conf context
> you
> > > are trying to dial from.
> > >
> > > Craig
> > >
> > > ----- Original Message -----
> > > From: "root linux" <[EMAIL PROTECTED]>
> > > To: <asterisk-users@lists.digium.com>
> > > Sent: Monday, August 22, 2005 11:30 AM
> > > Subject: [Asterisk-Users] Unable to create
> channel
> > > of type 'Zap'
> > >
> > >
> > > > My zaptel.conf config: -
> > > >
> > > > # Below setting is for E1
> > > > span=1,1,0,cas,hdb3
> > > > bchan=1-15
> > > > bchan=17-31
> > > > dchan=16
> > > >
> > > > loadzone = us
> > > > defaultzone=us
> > > >
> > > >
> > > > My zapata.conf config: -
> > > >
> > > > # Below setting is for E1
> > > > switchtype = national
> > > > signalling = pri_cpe
> > > > group = 1
> > > > channel => 1-15
> > > > channel => 17-31
> > > >
> > > > My extension.conf config: -
> > > >
> > > > [default]
> > > > exten => 181,1,Dial(Zap/1/181)
> > > >
> > > > When I perform a dailing from my SIP Phone, I
> got
> > > the
> > > > error message as below: -
> > > >
> > > > -- Executing Dial("SIP/1183000001-6f4e",
> > > > "Zap/1/181") in new stack
> > > > Aug 22 11:03:02 NOTICE[9023]: app_dial.c:764
> > > > dial_exec: Unable to create channel of type
> 'Zap'
> > > > == Everyone is busy/congested at this time
> > > >
> > > >
> > > > I am beginner...How to solve this?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> ____________________________________________________
> > > > Start your day with Yahoo! - make it your home
> > > page
> > > > http://www.yahoo.com/r/hs
> > > >
> > > >
> _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users@lists.digium.com
> > > >
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users@lists.digium.com
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> >
> >
> >
> ____________________________________________________
> > Start your day with Yahoo! - make it your home
> page
> > http://www.yahoo.com/r/hs
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>
>
http://lists.digium.com/mailman/listinfo/asterisk-users
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
