Which side of the span is actually providing the clock? The Asterisk side or the other side (telco?) If it is the telco the clock needs to be set to '0'.
Span=1,0,0,cas,hdb3 -Nate -----Original Message----- From: root linux [mailto:[EMAIL PROTECTED] Sent: Sunday, August 21, 2005 10:30 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Unable to create channel of type 'Zap' My zaptel.conf config: - # Below setting is for E1 span=1,1,0,cas,hdb3 bchan=1-15 bchan=17-31 dchan=16 loadzone = us defaultzone=us My zapata.conf config: - # Below setting is for E1 switchtype = national signalling = pri_cpe group = 1 channel => 1-15 channel => 17-31 My extension.conf config: - [default] exten => 181,1,Dial(Zap/1/181) When I perform a dailing from my SIP Phone, I got the error message as below: - -- Executing Dial("SIP/1183000001-6f4e", "Zap/1/181") in new stack Aug 22 11:03:02 NOTICE[9023]: app_dial.c:764 dial_exec: Unable to create channel of type 'Zap' == Everyone is busy/congested at this time I am beginner...How to solve this? ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users