Ok i'm looking will try to make a small manual for you, please make sure you have set the jumers of the pri card in asterik at the right position? Voor TE mode Here is my config of the e1 card the only thing that does not work on my pbx is to do a reboot with de cable plugged in the asterisk pbx don't know why but it just hangs. so boot after power down
Zaptel: loadzone=us defaultzone=us # E1 definition: crc4 check achter hdb3 ,crc4 span=1,1,0,ccs,hdb3 #E1: bchan=1-15,17-31 dchan=16 zapata [channels] signalling=pri_cpe switchtype=national echocancel=yes echocancelwhenbridged=no callerid=asreceived group=1 immediate = no context= incomming ; Points to the default context of your extensions.conf channel => 1-15,17-31 And on the siemens pbx turn of crc4 check on the e1 card configuration maybe you can give me your mail adres so i can make screenshots of the manager e configuration tool i can't mail pictures to the user list -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Pablo Allietti Verzonden: vrijdag 9 september 2005 20:29 Aan: Asterisk Users Mailing List - Non-Commercial Discussion Onderwerp: [Asterisk-Users] Re: siemens pbx what i ask techinician? On Fri, Sep 09, 2005 at 07:20:58PM +0200, Sander wrote: uuauuu that will great! i cant undertand too much about internal connection because. i have a PC with a te110p and my siemens is a hipath 3500 with a s2m/pri card is a E1 card. but i dont know how to connect between them. i have always the red alarm in the te110p. my conf files are both of this files i copy and paste from internet. /etc/zaptel.conf span=1,0,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 loadzone = us defaultzone = us and the /etc/asterisk/zapata.conf [channels] context=zap-in ;switchtype=qsig pridialplan=national signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no callprogress=no callerid=asreceived group=1 signalling=pri_net channel => 1-15,17-31 please help me!!! thanks a lot for your time!!!! > Do you want to connect the asterisk with pri or with internal isdn? > And what model pbx do you have? then i can tell you how to configure? > Maybe some screenshots with it > > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Namens Pablo Allietti > Verzonden: vrijdag 9 september 2005 19:35 > Aan: Asterisk Users Mailing List - Non-Commercial Discussion > Onderwerp: [Asterisk-Users] Re: siemens pbx what i ask techinician? > > On Fri, Sep 09, 2005 at 05:39:22PM +0200, Sander wrote: > > > > thanks Sander but i have the soft, and i can enter to the pbx conf and > modify all settings, but i dont know how settings i need to change. > > > It's not that easy then everytime you want to change someting for > > testing you have to ask them to change something i can give you the > > software for programming siemens pbx if you want > > > > > > > > > > -----Oorspronkelijk bericht----- > > Van: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Namens Pablo > > Allietti > > Verzonden: vrijdag 9 september 2005 16:09 > > Aan: asterisk-users@lists.digium.com > > Onderwerp: [Asterisk-Users] siemens pbx what i ask techinician? > > > > im really newbie, and i have a siemens digital pbx work in my work. > > i have 4 outside lines and the pbx has a E1/PRI card. what i need to > > ask my siemens > > provider(techinicians) to do in the pbx? > > > > i only have in my pbx the 9 to get a line to go outside is very > > simple. but i dont know what i need to ask them to programming. > > please > help me. > > -- > > > > .- > > > > Pablo Allietti > > LACNIC > > > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > ---end quoted text--- > > -- > > .- > > Pablo Allietti > LACNIC > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ---end quoted text--- -- .- Pablo Allietti LACNIC _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users