My TDM400 on fc4 was working great.. all of sudden ..i am having the same issue ..you guys are having all i tried to run asterisk as non-root user.. and I was able to run it as non-root and was able to receive and send call using asterisk..
I am not sure.. what thing I did wrong and coz all the trouble.. Thanks > -----Original Message----- > From: [EMAIL PROTECTED] > Sent: Tue, 13 Sep 2005 15:09:52 -0500 > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Fedora Core 4 not recognizing X100P cards > > > I have the same problem. > > I've been having a bit of trouble getting the cards to work with > asterisk, and I thought perhaps you might know what I might be doing > wrong. I installed them in a linux box, and when I check to see if the > OS has recognized them it looks fine: > > They show up as HSP56 MicroModem (rev 04) > > [EMAIL PROTECTED]> lspci > 00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host > Bridge > (MCH) (rev 04) > 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP > Bridge (rev > 04) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) > 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04) > 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04) > 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev > 04) > 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04) > 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 > Audio > (rev 04) > 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX > 4000 AGP > 8x] (rev c1) > 02:01.0 USB Controller: NEC Corporation USB (rev 41) > 02:01.1 USB Controller: NEC Corporation USB (rev 41) > 02:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02) > 02:09.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) > 02:0a.0 Modem: PCTel Inc: Unknown device 2181 (rev 04) > 02:0b.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) > 02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] > (rev 78) > 02:0d.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) > > > But when I try to start the wcfxo module it doesn't work: > > [EMAIL PROTECTED]> modprobe wcfxo > Notice: Configuration file is /etc/zaptel.conf > line 146: Unable to open master device '/dev/zap/ctl' > > > And the linux kernel doesn't quite recognize them: > > Sep 6 18:58:45 asterisk2 kernel: zaptel: no version for > "struct_module" found: kernel tainted. > Sep 6 18:58:45 asterisk2 kernel: Zapata Telephony Interface Registered > on major 196 > > > When I try to configure the ztcfg it doesn't find anything on channel 1: > > > [EMAIL PROTECTED]> /sbin/ztcfg -vvv > > Zaptel Configuration > ====================== > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 4 channels configured. > > ZT_CHANCONFIG failed on channel 1: No such device or address (6) > > > And Asterisk can't get them working: > > [chan_zap.so] => (Zapata Telephony) > == Parsing '/etc/asterisk/zapata.conf': Found > Sep 6 19:01:34 WARNING[2549]: chan_zap.c:778 zt_open: Unable to > specify channel > 1: No such device or address > Sep 6 19:01:34 ERROR[2549]: chan_zap.c:6239 mkintf: Unable to open > channel 1: > No such device or address > here = 0, tmp->channel = 1, channel = 1 > Sep 6 19:01:34 ERROR[2549]: chan_zap.c:9191 setup_zap: Unable to > register > channel '1-4' > Sep 6 19:01:34 WARNING[2549]: loader.c:345 ast_load_resource: > chan_zap.so: > load_module failed, returning -1 > == Unregistered channel type 'Tor' > == Unregistered channel type 'Zap' > Sep 6 19:01:34 WARNING[2549]: loader.c:440 load_modules: Loading module > chan_zap.so failed! > > > I've tried most of the pci cards and they all give the same result. > When using a different type of card in that same PC i don't get those > errors. I thought perhaps there is some software upgrade necessary for > them to work, or something along those lines? Any help you could mention > would be very appreciated. Thanks > > > -- > Ing CIP Alejandro Celi Mariátegui > <[EMAIL PROTECTED]> > > > El mar, 13-09-2005 a las 15:01, Mojo with Horan & Company, LLC escribió: > > hisax seems to be a loadable module for an ISDN card. if: > > > > # lsmod | grep hisax > > > > prints any output, try > > > > # rmmod hisax; modprobe zaptel > > > > ? > > > > hth > > Mojo > > > > Shawn Porter wrote: > > > I am getting quite frustrated today, so please bear with me. > > > > > > I just installed Fedora Core 4 (was running RedHat 9 with a working > > > Asterisk) > > > > > > now my Fedora does not appear to be recognizing my X100P (clone) at > all. > > > > > > > > > > > > Hardware browser just shows them as unknown device. driver: hisax > > > > > > So, of course, my zaptel drivers do not work and therefore my > asterisk > > > does not work. > > > > > > > > > > > > any help would be greatly appreciated….. > > > > > > > > > > > > Shawn > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > > > Asterisk-Users mailing list > > > Asterisk-Users@lists.digium.com > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users