Hi,
I have a little situation here :( Perhaps somebody can give me a
hand with it.
I have an Asterisk working, and in another office, a Sipura
SPA-3000.
I configured the SPA and I have the extension working, the incomming
trunk working, but the outgoing trunk (peer) does not work.
The issue is that I have a dynamic IP where the SPA is, and neither
the SPA nor my router have DynamicDNS.
So, if I manually change the host for the peer for the SPA PSTN
Line, then everything works fine, and I can make local calls through it.
BUT when my router's IP changes... I am lost. (EVEN while the
extension SPAN Line 1, or the incomming trunk are registered and DO work.)
According to what I read, if I setup the outgoing trunk to type=peer
with host=dynamic, then I can make the peer to register itself into the
Asterisk, so the asterisk will know where to contact the peer.
But.... I cannot figure out how to make the SPA register as the
peer? I can make it register as a type=friend for the incomming traffic, but
not as a peer..
The Line 1 part of the SPA is registering and working neatly.
BTW I have [EMAIL PROTECTED]
Any idea, suggestion, or whatever you can think about it?
Thanks!!!
Alchaemist
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
