Another trivial question: Is there a "place" where all the parameters are documented ? In example (my example!) I would like to know the meaning of a lot of parameter that can be used in sip.conf,
A lot of these keywords are intuitive keywords (i.e. NAT=YES/NO;PORT=5060; context=xxxxx) but other are not (at least for me) i.e.: type = peer, friend insecure=very host=dynamic and so on. At last, my need is: Accept a non-registerd sip-strem from a well known ip address (and only from that ip address....) I tried to add a [testsip] ;username=testsip type=friend ;secret=testsip qualify=no port=5060 nat=no host=x.y.z.w dtmfmode=rfc2833 context=from-internal canreinvite=no callerid="test sip " <testsip> that would work if the sip would be registered. But the SIP client is not able to register. I solved using the context = from-sip-external ; Send unknown SIP callers to this context and it works, but I have no more the control about who is sending me SIP stream (anybody now can use my asterisk box...) any help will be greatly appreciated Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla. Visitate il sito http://www.frameweb.it _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users