On Thu, Nov 24, 2005 at 10:16:40PM +0100, Francesco Peeters wrote: > On Thu, November 24, 2005 20:09, Francesco Peeters said: > > On Wed, November 23, 2005 20:29, Francesco Peeters said: > <SNIP> > > > > Just made myself a crossed NT1 connection to the NT mode card (as > > described on the PBX4linux site) and connected my phone. > > > > The zaphfc driver shows that layer 1 is activated (G3) once the phone is > > connected, but that is where it stops, as anything above that should be > > handled in chan_zap. > > > > However when I leave the card in bri_cpe_ptmp in zapata.conf, the layer2+ > > protocols are not correct (TE mode) and when I put in bri_net_ptmp, the > > chan_zap somehow doesn't complete loading or exits in an unexpected > > manner, resulting in a situation where Asterisk stops loading it's > > configs, and thus runs without a dialplan and other modules... > > > > Seems to me there's an issue in that area: chan_zap, maybe libpri, etc.
So what do you have in zapata.conf? > > > > I keep replying to myself... ;-) > > Some extra info: > /proc/zaptel/*: > Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" AMI/CCS > > 1 ZTHFC1/0/1 Clear (In use) > 2 ZTHFC1/0/2 Clear (In use) > 3 ZTHFC1/0/3 HDLCFCS (In use) > Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [NT] layer 1 ACTIVATED (G3)" AMI/CCS > > 4 ZTHFC2/0/1 Clear (In use) > 5 ZTHFC2/0/2 Clear (In use) > 6 ZTHFC2/0/3 HDLCFCS (In use) > > /proc/pci: > Bus 0, device 7, function 2: > USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1). > IRQ 11. > Master Capable. Latency=32. > I/O at 0xc000 [0xc01f]. > Bus 0, device 9, function 0: > Network controller: Cologne Chip Designs GmbH ISDN network controller > [HFC-P > CI] (rev 2). > IRQ 11. > Master Capable. Latency=16. Max Lat=16. > I/O at 0xc400 [0xc407]. > Non-prefetchable 32 bit memory at 0xe3001000 [0xe30010ff]. > Bus 0, device 17, function 0: > Network controller: Cologne Chip Designs GmbH ISDN network controller > [HFC-P > CI] (#2) (rev 2). > IRQ 11. > Master Capable. Latency=16. Max Lat=16. > I/O at 0xcc00 [0xcc07]. > Non-prefetchable 32 bit memory at 0xe3002000 [0xe30020ff]. > > I have tried all I can to assign different IRQ's to the HFC-PCI cards, but > they *always* take IRQ 11 :-( > > -- > Francesco Peeters > ---- > GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 > If your program doesn't recognize my signature, please visit > http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users