Many thanks in advance for anyone that can offer help on the following questions:
Asterisk Box Using [EMAIL PROTECTED] build and updated Asterisk to v2.1 P4, 400 Mhz, 384Mb RAM, 40Gb HD 4 OEM X100P Cards Phones Grandstream GXP-2000 2 * Grandstream BT-100 HandyTone 486 Sipura SPA-3000 Questions 1) When someone calls in to one of the FXO lines, there is a 3-4 second delay before the configured internal extension starts ringing. Is there anyway to reduce this? 2) Is it possible to make Asterisk behave like a typical office PBX, in so much as after I press 9, I then get an outside line and hear the TelCo. dial tone. Is there anyway to make a phone dial without pressing # key? (i.e. so it automatically complete the number by itself. I'd like it to act like a normal PBX, so after press 9, then here an outside dial tone). 3) I get a lot of echo and noise distortion when making an external TelCo call. Some people say they can't hear what I say. 4) Is it possible to make a routing, as follows Dial 8 go to Internet Call Dial 9 go to TelCo. Call 5) How do I change the time zone for Asterisk? Currently the system time is correct but when I dial *60 it reports a different time (out by many hours). Zapata.conf added ;Added by RB loadzone=th defaultzone=th busydetect=yes callprogress=yes indications.conf Changed [general] country=th Added [th] description = Thailand ringcadance = 2000,4000 dial = 400*33 busy = 400/500,0/500 ring = 400/1000,0/4000 congestion = 400/100,0/100,400/100,0/100,400/100,0/100,400/300,0/100 callwaiting = 400/300,0/10000 ;These below are made up. dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,0 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users