Peter, After upgrading to 1.0.1.13 I had some miscellaneous problems on one of my GXP-2000's--it would grab an IP address, but it wouldn't get the time/date, it wouldn't register, blah blah blah. I could access the web interface OK, so it wasn't a network issue (I don't think). Anyway...I ended up resetting to factory defaults and all is well now. Maybe try that? That has solved some other problems I've had as well. I dunno if ur familiar with the process, but it's kinda screwy, here's the info: http://www.grandstream.com/user_manuals/GXP2000.pdf scroll down to the very last page. Do the other phones on the same network get the time and date OK from time.nist.gov?
-ross -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Bowyer Sent: Saturday, December 31, 2005 4:35 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] GXP-2000 fw 1.0.1.13 and NTP Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on the display. Anyone heard of this? Any workarounds (other than go back to 1.0.1.12) ? (Hmmm.. just regressed to 1.0.1.12 and it's still not working - curiouser and curiouser said Alice...) Thanks Peter _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users