Could be they pressed the DND code for the SPA (don't remember by heart what it is, something like *xx). The easiest way to check is to log into the http server of the SPA and check the status on the first page.
On 1/3/06, Matt <[EMAIL PROTECTED]> wrote: > Hi, > I have about 53 SPA-2002 units out in the field. I've seen two or > three of them, now, exhibit an odd happening. > > Users plug their phones into LINE1 (unless they have two lines). The > two users I've had issues with are both employees here who are fairly > knowledgeable in computers. They both were using portable phones and > that was the only phone they used (so no trying to back feed the house > or anything). > > Both of them started using the service with the device around October > of this past year (2005). > > Just recently both of them have come to me and said they could place > outbound calls just fine, however inbound calls go to voicemail. I > did some looking and the ATA is sending a "Busy" message back to > asterisk. (Even when the phone is on hook).. (Even when the phone is > unplugged!!). > > I moved the config and the phone to LINE_2 and all is well. Any > thoughts on this? > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users