Good guess, I recompiled asterisk and now things are falling in place. Thanks for the pointers.
BR. Arnar On Thu, 2006-01-05 at 23:12 +0100, Domjan Attila wrote: > Hi, > did you compile the asterisk after the libpri install? > check it! > [EMAIL PROTECTED] ~]# ldd /usr/lib/asterisk/modules/chan_zap.so > libpri.so.1 => /usr/lib/libpri.so.1 (0x00002aaaaac30000) > libtonezone.so.1 => /usr/lib/libtonezone.so.1 > (0x00002aaaaad58000) > libc.so.6 => /lib64/tls/libc.so.6 (0x00002aaaaae7f000) > libm.so.6 => /lib64/tls/libm.so.6 (0x00002aaaab0b2000) > /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) > > On Thu, 2006-01-05 at 23:07 +0100, Arnar Gestsson wrote: > > Hi there, > > > > well supposedly I've compiled and installed libpri and it actually > > resides in /usr/lib. I've installed /usr/lib in the /etc/ld.so.conf > > explicitly but without a luck. But I'll check this path anyhow more > > thoroughly. > > > > Thanks for the advice. > > > > BR. Arnar > > > > > > On Thu, 2006-01-05 at 23:01 +0100, Domjan Attila wrote: > > > Hi, > > > I think you didn't install the libpri. > > > > > > On Thu, 2006-01-05 at 22:48 +0100, Arnar Gestsson wrote: > > > > Hi guys, > > > > > > > > I've been installing and configuring a TE110p card. The compile and > > > > install went very well. I'm using this on FC4 and I compile with > > > > linux26 as well checked I on the udev configs. > > > > > > > > zttool and ztcfg both indicate that the card is ready. > > > > > > > > But when I try to "load chan_zap.so" then I get the following > > > > > > > > > > > > Unable to load module chan_zap.so > > > > Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown > > > > signalling method 'pri_cpe' > > > > Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must > > > > be specified before any channels are. > > > > Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource: > > > > chan_zap.so: load_module failed, returning -1 > > > > > > > > My config is here below. > > > > > > > > TIA > > > > > > > > Arnar Gestsson > > > > > > > > > > > > /etc/zaptel.conf > > > > > > > > span=1,1,0,ccs,hdb3,crc4 > > > > > > > > loadzone = nl > > > > loadzone=de > > > > defaultzone=nl > > > > > > > > bchan=1-5,7-15,17-31 > > > > dchan=16 > > > > > > > > /etc/asterisk/zapata.conf > > > > > > > > [trunkgroups] > > > > trunkgroup => 1,16 > > > > spanmap => 1,1 > > > > > > > > [channels] > > > > language=en > > > > context=default > > > > switchtype=euroisdn > > > > pridialplan=unknown > > > > signalling=pri_cpe > > > > ;rxwink=300 > > > > usecallerid=yes > > > > hidecallerid=no > > > > callwaiting=yes > > > > usecallingpres=yes > > > > callwaitingcallerid=yes > > > > threewaycalling=yes > > > > transfer=yes > > > > cancallforward=yes > > > > callreturn=yes > > > > echocancel=yes > > > > echocancelwhenbridged=yes > > > > rxgain=5.0 > > > > txgain=1.0 > > > > echotraining=yes > > > > group=1 > > > > callgroup=1 > > > > pickupgroup=1 > > > > immediate=no > > > > channel => 1-15,17-31 > > > > > > > > > > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users