I have seen issues where people had edited the files in windows. The hint is that Asterisk was complaining about having ^M in the config files....
PaulH ----- Original Message ----- From: "stotaro" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Friday, January 06, 2006 9:17 AM Subject: Re: [Asterisk-Users] TE110p and pri_cpe signalling not recognized > I had this problem and while not 100% sure. I think the solution was > whitespace at the end of the lines in the conf file. Opened the file with > vi, went to each line and hit end to make sure there were no extra spaces, > there were, removed them, rebooted and issue went away. > > > > Hi guys, > > > > I've been installing and configuring a TE110p card. The compile and > > install went very well. I'm using this on FC4 and I compile with > > linux26 as well checked I on the udev configs. > > > > zttool and ztcfg both indicate that the card is ready. > > > > But when I try to "load chan_zap.so" then I get the following > > > > > > Unable to load module chan_zap.so > > Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown > > signalling method 'pri_cpe' > > Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must > > be specified before any channels are. > > Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource: > > chan_zap.so: load_module failed, returning -1 > > > > My config is here below. > > > > TIA > > > > Arnar Gestsson > > > > > > /etc/zaptel.conf > > > > span=1,1,0,ccs,hdb3,crc4 > > > > loadzone = nl > > loadzone=de > > defaultzone=nl > > > > bchan=1-5,7-15,17-31 > > dchan=16 > > > > /etc/asterisk/zapata.conf > > > > [trunkgroups] > > trunkgroup => 1,16 > > spanmap => 1,1 > > > > [channels] > > language=en > > context=default > > switchtype=euroisdn > > pridialplan=unknown > > signalling=pri_cpe > > ;rxwink=300 > > usecallerid=yes > > hidecallerid=no > > callwaiting=yes > > usecallingpres=yes > > callwaitingcallerid=yes > > threewaycalling=yes > > transfer=yes > > cancallforward=yes > > callreturn=yes > > echocancel=yes > > echocancelwhenbridged=yes > > rxgain=5.0 > > txgain=1.0 > > echotraining=yes > > group=1 > > callgroup=1 > > pickupgroup=1 > > immediate=no > > channel => 1-15,17-31 > > > > > > > > -- > > Arnar Gestsson <[EMAIL PROTECTED]> > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.371 / Virus Database: 267.14.13/221 - Release Date: 1/4/2006 > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users