Your trunk is set for pulse, should probably be set for tone - that may help?
CLS DTN instead of the (archaic default) DIP -----Original Message----- From: Greg Camp [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 25, 2006 8:56 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI This is on an MSDL card. What is your individual trunk member config? Our zapata.conf / zaptel.conf are basically the same. No, they are exactly the same.... Interesting side note: we located an old Option 11 (release 19 with a cartridge!) and were able to get the below config to work just fine. Obviously there are some subtle differences since there is no MSDL on an Option 11, but other than the missing prompts due to an older OS on the Nortel, the config is the same. We don't really want to leave the Option 11 running just to support Asterisk. Do you get name display on your Asterisk phones when someone from the Nortel calls? That's one thing that doesn't happen on the Opt11. Names do get displayed on the Nortel phone when called from an Asterisk phone, however. REQ issp VERSION 2611 RELEASE 25 ISSUE 30 + MDCS01 NA00 PSWV VERSION: PSWV 53 cequ DLOP NUM DCH FRM LCMT YALM TRSH PRI 088 23 ESF B8S FDL 00 ADAN DCH 88 CTYP MSDL GRP 0 DNUM 12 PORT 0 DES asterisk USR PRI DCHL 88 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 T200 3 T203 10 N200 3 N201 260 K 7 TN 088 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 38 1 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DIP CND WTA LPR APN THFD HKD P10 VNL TKID DATE 24 JAN 2006 TYPE RDB CUST 00 ROUT 38 DES ASTERISK TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS INT DTRK YES DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 00000 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC NO ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8138 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 NBL 4096 IENB 5 PAGE 002 TFD 0 DRNG NO CDR NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO Thanks, Greg > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Schochet, Wes > Sent: Tuesday, January 24, 2006 8:38 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI > > I have a 61c running steady and reliable. ENLL in 60 will always bring up > the DCHannel, whether it's disabled in 96 or not. Lets see some M1 > configs > - I'll show you mine if... > > LD 22 > REQ prt > TYPE cequ > <blah blah> > DLOP NUM DCH FRM TMDI LCMT YALM TRSH > TRK 020 24 ESF NO B8S FDL 00 > PRI 002 24 ESF NO B8S FDL 00 > <blah blah> > 019 23 ESF NO B8S FDL 00 > <blah blah> > > REQ PRT > TYPE ADAN DCH 5 > > ADAN DCH 5 > CTYP MSDL > DNUM 10 > PORT 2 > DES Asterisk > USR PRI > DCHL 19 > OTBF 32 > PARM RS422 DTE > DRAT 64KC > CLOK EXT > IFC ESS5 > SIDE USR > CNEG 1 > RLS ID 1 > RCAP ND2 > MBGA NO > OVLR NO > OVLS NO > T200 3 > T203 10 > N200 3 > N201 260 > K 7 > > > > >ld 21 > PT1000 > > REQ: PRT > TYPE: RDB > CUST 0 > ROUT 19 > > TYPE RDB > CUST 00 > ROUT 19 > DES ASTERISK > TKTP TIE > NPID_TBL_NUM 0 > ESN NO > CNVT NO > SAT NO > RCLS INT > VTRK NO > DTRK YES > BRIP NO > DGTP PRI > ISDN YES > MODE PRA > IFC ESS5 > SBN NO > PNI 00000 > SRVC NNSF > NCNA YES > NCRD YES > CHTY BCH > CTYP UKWN > INAC NO > ISAR NO > CPUB OFF > DAPC NO > BCOT 0 > DSEL VOD > PTYP PRI > AUTO NO > DNIS NO > DCDR NO > ICOG IAO > SRCH LIN > TRMB YES > STEP > ACOD 2019 > TCPP NO > PII NO > TARG 01 > CLEN 1 > BILN NO > OABS > INST > IDC NO > DCNO 0 * > NDNO 0 > DEXT NO > ANTK > SIGO STD > ICIS YES > TIMR ICF 512 > OGF 512 > EOD 13952 > NRD 10112 > DDL 70 > ODT 4096 > RGV 640 > GRD 896 > SFB 3 > NBS 2048 > > > PAGE 002 > > NBL 4096 > > IENB 5 > TFD 0 > VSS 0 > VGD 6 > DRNG NO > CDR NO > VRAT NO > MUS NO > RACD NO > FRL 0 0 > FRL 1 0 > FRL 2 0 > FRL 3 0 > FRL 4 0 > FRL 5 0 > FRL 6 0 > FRL 7 0 > OHQ NO > OHQT 00 > CBQ NO > AUTH NO > TDET NO > TTBL 0 > ATAN NO > PLEV 2 > ALRM NO > ART 0 > SGRP 0 > AACR NO > > > Dchannel daughter card on a NT5D12 or an actual MSDL? Jumpers can kill! > > Asterisk Files: > > zaptel.conf: > > loadzone = us > defaultzone = us > > #span definitions > span = 1,1,0,esf,b8zs > > #channel definitions > bchan = 1-23 > dchan = 24 > > > zapata.conf > > [channels] > context = from-internal > switchtype = 5ess > usecallerid = yes > echocancel = yes > echocancelwhenbridged = yes > rxgain = 0.0 > txgain = 0.0 > > signalling = pri_net > group = 1 > channel = 1-23 > > I am using a sangoma A101 (which rocks, btw). Should be the same diff... > > > -----Original Message----- > From: Greg Camp [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 24, 2006 4:08 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI > > > > > Yes, we have disabled the dch and loop several times (both on Nortel > and > > Asterisk sides). We also disabled the entire MSDL card and issued a > > full download to both the MSDL and the DCH. Neither got us any > further. > > > > Have you had success getting PRI between a Nortel 81C and Asterisk to > > work? > > > > Thanks, > > Greg > > > > OK, but did you do the sequence as I mentioned, probably I guess. > > 1)dis dch, 2)dis loop, 3)enable loop, 4)enable dch as below - > > > > Unfortunately, although I've supported multiple 81's I've only had a > > requirement to connect an Asterisk to a little Avaya INDeX. > > > > Steve > > Yes, we followed that sequence. We've had to follow that sequence with > some > of our carriers as well to make the b-channels come up properly. > > Greg > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users