General config info:
3 PRIs, configured as such:
span=1,2,0,esf,b8zs
span=2,0,0,esf,b8zs
span=3,1,0,esf,b8zs
span=4,0,0,esf,b8zs
I have modified the 2 and 1 timing source declarations to several different configurations but am unsure what the proper way to configure that is. Is my current setup correct? Both span one and span three have timing on the line from the carrier.
Rundown of issues seen with these cards:
TE410P:
- zttest will never report 100% for me across different motherboards (Supermicro P8SCT, Dell 850)
- Crash/instability of about once per two weeks where I have to power cycle the server, i.e. phone calls stop working and a reboot fixes it
TE406P:
- zttest runs flawlessly on this card, 100% across the board
- PRIs will go from up and working fine, to "Provisioned, Down, Active" after the server has been up for around 10 minutes, this may be related to rxfax and txfax being installed? Has anyone had an issue with this specific card? We have had this experience across multiple motherboards.
After working with two different cards and across multiple motherboards I am starting to lose faith on the stability of the Asterisk platform, but I know others are having lots of success. My boss is looking for something that says "With the TE406P, we have had zero issues on X motherboard", does anyone have any recommendations? Has anyone else had stability issues with the digium 4 port cards?
Thanks,
Kyle
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
