Duh.. sorry for this dumb mistake, basicaly the connection is:
PRI <-TE210 Port 1-> * <-TE210 Port 2-> Legeacy PBX
Basically I need * to send whatever the telco used to send to the pri
Thanks!
On Sun, 30 Apr 2006, Jerry Jones wrote:
You do not say how you have the two connected/
Are you connecting the * to stations via fxo or to lines via fxs on the
legacy?
On Apr 30, 2006, at 11:22 AM, Remco Barende wrote:
Hi list!
I managed to come reasonably far (farther than I thought I would) but have
two problems.
I still need to pass calls to the Legacy PBX for Fax (I need it as a
channel bank).
I have calls coming in into asterisk, that works fine. Based on the DID I
can route calls to the Legacy PBX but I'm puzzled how.
I guess I need a new dial command for that? All fax calls are now coming in
a new context which I called topbx. If I issue a dial command there the
legacy PBX treats it as a local extension call and not a call from the
outside.
Which dial command do I need to use to make the old PBX believe the call
came from outside?
(All the pages I found on this subject mention something about retaining
caller ID which is nice but now I need to retain DID info on the call I
guess?)
Thanks for any help!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users