Hi Josue and list, This is part of my dmesg log. Also one other thing, I don't know why the red light on span/port 1 of my card keep flashing.. is it normal that way? Or it's supposed to mean something? Obviously I have no experience with ISDN before so this is my very first try.
Found TE2XXP at base address e7001000, remapped to e001a000 TE2XXP version c01a0164, burst OFF, slip debug: OFF FALC version: 00000005, Board ID: 00 Reg 0: 0x1e6ab400 Reg 1: 0x1e6ab000 Reg 2: 0xffffffff Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a0164 Reg 7: 0x00001000 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE2XXP: Launching card: 0 TE2XXP: Setting up global serial parameters Found a Wildcard: Wildcard TE205P About to enter spanconfig! Done with spanconfig! Registered tone zone About to enter startup! TE2XXP: Span 1 configured for ESF/B8ZS wct2xxp: Setting yellow alarm on span 1 2G: Got interrupt, status = 0000000d, GIS = 0081 SPAN 1: Primary Sync Source 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 VPM: Not Present Completed startup! 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 2G: Got interrupt, status = 0000000a, GIS = 0080 About to enter spanconfig! About to enter startup! TE2XXP: Span 1 configured for ESF/B8ZS SPAN 1: Primary Sync Source Completed startup! Registered tone zone About to enter spanconfig! About to enter startup! TE2XXP: Span 1 configured for ESF/B8ZS SPAN 1: Primary Sync Source Completed startup! Registered tone zone About to enter spanconfig! About to enter startup! TE2XXP: Span 1 configured for ESF/B8ZS SPAN 1: Primary Sync Source Completed startup! Registered tone zone --- Josué Conti <[EMAIL PROTECTED]> wrote: > Hi, test with dmesg and past in list the log´s > > Regards > > Josué > > 2006/5/10, azyuky <[EMAIL PROTECTED]>: > > > > Hi guys, > > > > Currently I just purchased the TE205P for the installation of my ISDN30 > > setup. I > > compiled, setup the card correctly I think. When I do the ztcfg -vvv it > > shows all 31 > > channels clear, with 30 bchannels using for voice ranging from 1-15, > > 17-31, and 16 > > is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 > > channels > > configured, and then, when I do a cat /proc/zaptel/2 I see the rest 7 > > channels. I > > setup the jumper correctly all closed to use the card in E1 mode.. I'm not > > sure what > > I did wrong here but the card should just display all 31 channels on span > > 1 > > (/proc/zaptel/1) instead of spreading it accross to the second span? > > > > Help is appreciated. Thank you. > > > > .z > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam protection around > > http://mail.yahoo.com > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users