Stephen Bosch wrote: > That's the trouble. So many places to configure! <snip>
> Here's one source of confusion -- > > The parameters in the "Server: ..." category are > > Address: [this is supposed to be the DNS or IP address of the SIP server] > Port: 5060 > DNS Lookup: UDP only [I set this to UDP only because the internal DNS > server we're using here only does UDP] > Register: Yes > > Now I have to set up the lines, so I go back up a level and down into > "Line 1: ..." where I see > > Display Name: [don't know what this is for] > Address: [what goes here? SIP server address again?] Okay: I believe I have figured it out through trial and error. This "Address" field needs to contain the extension's address in the format: <extension name>@<FQDN of SIP server> So, in my case: [EMAIL PROTECTED] If I leave the address blank, the phone never registers. If I put the address in as shown above, it works! (I have been working on this for 2 days, so you can imagine I'm pretty pleased.) This information really belongs in the wiki, so perhaps I'll register and update the pages. I hope having this solution in the archives will help some other lost souls, too. I'm really frustrated that Polycom's documentation isn't clearer, though... -Stephen- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users