Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything.
Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten => s,1,Dial(IAX2/carey) exten => s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel => 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +0000, [EMAIL PROTECTED] wrote: > So, your dialplan for that incoming call is just the one line? > > exten => > s,1,Dial(IAX2/carey) > > Nothing else? Try adding a Hangup command on the > next priority and see if that helps any. > > exten => s,2,Hangup > > If you > already have a Hangup command in there, then I apologize for wasting your > time. :) > > Undrhil > > --- Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com wrote: > I have a TDM-400P with one FXO module. > On an incoming call, I have set > > Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)), > which is > > basically the only thing in my dialplan. > > > > When the call > is answered by the PSTN phone first, or when the ringing > > call is hung up, > Asterisk keeps ringing for 5+ seconds, which causes > > trouble (the answering > of already answered calls). > > > > I noticed in the Asterisk console that > my phone is called twice every > > time there is an incoming call. Is this > normal, and could it be causing > > this behaviour? > > > > If not, any ideas > as to what could be causing this? I can provide full > > debug logs and my > relevant configuration if needed. > > > > Console log: > > > > -- Starting > simple switch on 'Zap/4-1' > > -- Executing Dial("Zap/4-1", "IAX2/carey") > in new stack > > -- Called carey > > -- Starting simple switch on 'Zap/4-1' > > > -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack > > -- Called > carey > > -- Call accepted by 10.0.12.102 (format ulaw) > > -- Format > for call is ulaw > > -- Call accepted by 10.0.12.102 (format ulaw) > > > -- Format for call is ulaw > > -- IAX2/carey-1 is ringing > > -- > IAX2/carey-1 is ringing > > -- Hungup 'IAX2/carey-1' > > == Spawn extension > (incoming, s, 1) exited non-zero on 'Zap/4-1' > > -- Hungup 'Zap/4-1' > > -- Hungup 'IAX2/carey-1' > > == Spawn extension (incoming, s, 1) exited > non-zero on 'Zap/4-1' > > -- Hungup 'Zap/4-1' > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users > mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users