|
Hi Koen Van Impe Thanks for the meridian config and asterisk. I will
defenitly try them And let every one know. Just a few words and correct me if I am wrong There are two things 1
E1 : the 32 channels once both the equipment
see each other and the ccs/hdb3 encoding/format is read the LED infront of
interface goes green and this makes the lower layer work. 2
ISDN PRI: once step one is complete
we can proceed to the signaling of ISDN PRI that is euro isdn or 5ess or any . I might be wrong But the problem that I face is the first step the e1 never
comes up I have and the LED never goes green. I have checked the cable it work
s fine with other pri which interms confirms the card also. But with the new config that u have given me I pray it works
bcz it is very critical for my organization as we are tired of paying Nortel bags and bags of money and with this idea of using
asterisk and interface it with the existing meridian system we see a hope
of expanding with very little investment. Thanks and regards mohammad |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
