Piotr Chytla schrieb:
On Wed, Jun 14, 2006 at 10:04:04AM +0200, Kai Ober wrote:
Have you only one BN-Card? or more?
I've one BN8S0 card and one TE110P - T1 connection to Rhino channelbank.
i have two cards, had compareable problems.
PCM was the magic word ...
from my misdn-init.conf:
card=1,0x8,pcm_slave,ignore_pcm_frameclock //important!
option=9,master_clock // 9
for port 9
pcm=1,1
//not sure, if this is really neaded
Intresting I'm going to try this today . I thinking also about 'ulaw'
option to 'card=' . My channelbank is T1 and this will eliminate transcoding from
isdn to T1.i
hmm, my S0 cards are connected over a pcm bus ( the BN8S0 provides
this, ).
I don't think the pcm stuff will solve your problem, but hey, give it a try
kai
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
