On 8/4/06, Steve Totaro <[EMAIL PROTECTED]> wrote:
I am not totally up to speed on the MX2800 but I have gone to loopback
tests and loop T1 25-28 and selected every possible selection while
watching pri debug span 1 on the console, no output at all.
Jerry Jones wrote:
> If you see no errors on your MX2800 for the ds3 then they are probably
> not the issue.
>
> What does the MX2800 show for T1 which do not work? If you loop toward
> * does the card see itself? Loop toward GX do they see?
>
>
> On Aug 4, 2006, at 11:15 AM, Steve Totaro wrote:
>
>> I have a DS3/T3 that was dropped into my telco closet as two coaxial
>> cables. A send and receive. I needed to extend it so I went to
>> Radio Shack to buy some barrel connectors. They did not have any but
>> they did have T-Connectors so I bought a couple of those.
>> Everything was fine up until I went to turn up the seventh set of
>> four T1s. They will not come up, no Asterisk output or greenlight on
>> a Digium TE410. Global Crossing says they only responsible for the
>> DS3. I wonder if the T-Connectors could be the problem?
>>
>> I have already tried the same cables and server on known working T1s
>> and they come up fine. My Adtran MX2800 shows OK for those T1s so I
>> dont think the problem is between the Adtran and Asterisk box (as
>> Global Crossing claims), I have tried changing to the second
>> controller card in the Adtran and also reseated the amphenol
>> connection between the Adtran MX2800 and the T1 breakout box.
>> Anyone with this kind of experience have any ideas?
>>
>> I am going to find some real barrel connectors and try that next.
>>
If your M13 is coming up clean, I'd double check the continuity to
those ports from the DSX connections out to the patch panel.
--
Bird's The Word Technologies, Inc.
http://www.btwtech.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
