You can take a regular straight though cable and plug it into the green
and the other end into the red. You should get a yellow AIS light on
send-in and receive-in. If you don't, then your jacks are probably the
issue.
I get a yellow AIS light on both send-in and receive-in.
Mine is:
T1 cross over from Red jack to T110P (Going by the picture on the Wiki).
Straight though from Green jack to channel bank.
same here
I know it's wired properly because you can set mode LPb to 3 (metallic bypass) which bypasses any processing on the echo card. After doing this T100P was communicating with channel bank as before.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
