On Sun, 6 Aug 2006, Stefan-Michael. Guenther (in-put GbR) wrote: > Hello, > > > The log doesn't show anything about the call is terminated. > > Anyway, the message "Fax tone detected, but no fax extension for" is just a > > notice. If you don't have an extension "fax" in your context, nothing else > > is done. With newer chan_capi you can disable this with faxdetect=off. > > > chan_capi is version 0.6.5 and asterisk is version 1.2.9.1.
You need newer version of chan-capi (current trunk) to use the faxdetect= option. > Here's a complete log with verbosity and debugging set to 4. > Should I worry about the three messages > > chan_capi.c:3951 capi_signal_progress: wrong channel state to signal PROGRESS No, this is just a debug info. > ISDN4: too much voice to send for NCCI=0x61a04 This may happen at beginning of connection (when too many voice-frames are waiting), but should not happen during connection. If it happens, frames will be dropped, because Asterisk provides them out of sync. > Protocol error layer 1 (broken line or B-channel removed by signalling > protocol) This is the cause of your problem! Your physical ISDN connection is broken. Maybe your cross/NT connection is not setup correct. Armin _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users